基于多重网格法的三维有限元程序设计

英文篇名：Design of Three-dimensional FEM Program Based on Multigrid Method
中文刊名：西安工业大学学报
英文刊名：Journal of Xi'an Technological University
作者：黄鹏程 ; 杨月诚 ; 周伟
英文作者：HUANG Peng-cheng ; YANG Yue-cheng ; ZHOU Wei(Department of Impetus and Launch Engineering ; The Second Artillery Engineering College ; Xi'an 710025 ; China)
中文关键词：计算力学 ; 多重网格法 ; 有限元法 ; N-R方法 ; NEWMARK方法
英文关键词：computational mechanics ; multigrid method ; FEM ; N-R method ; newmark method
出版日期：2008-12-15
机构：第二炮兵工程学院动力与发射工程系;
年：2008
期：06
出版单位：西安工业大学学报

摘要

为了提高普通有限元方法在解决大型工程计算问题时的收敛性和准确性.文中在普通有限元方法的网格信息预处理过程和迭代求解过程中加入了多重网格方法的迭代方法和校正技术,使其与有限元方法有机地结合在一起,成功地构造了一种多重网格有限元法,并用FORTRAN95语言编写了面向对象的源代码SAFEM.数值验证表明,此方法收敛稳定、快速,且具有很高的精度,在加密网格与ABAQUS网格同样的条件下,能使其数值解与理论解的相对误差在1%之内,比ABAQUS解的相对误差稍低,而计算时间远远短于ABAQUS的求解时间,显示出极大的工程实用价值.
For improvement of astringency and accuracy in large-scale project problems by using ordinary FEM,multigrid method is introduced into 3D structural analysis of finite method during pretreatment of net message and iterative computation using ordinary FEM.A new multigrid method for FEM is constructed systematically.Furthermore,the code has been written in Fortran 95.It's indicated that convergence of multigrid method is not only stable but also fast,and it has high precision.If it is the same conditions of finest net and ABAQUS net,relative error between numerical solution and theoretic solution is less than 1% which is less than that of ABAQUS,and computation time is greatly less than that of ABAQUS.This new method is proved tremendous engineering value.

引文

[1]Namazifard A,Parsons I D,Acharya A,et al.ParallelStructural Analysis of Solid Rocket Motors[C]//AIAA Joint Propulsion Conference.Huntsville,USA.AIAA,2000:3457.
    [2]Sergey V Polstyanko,Peng Guanghua,Lee Jin-Fa.Al-gebraic Multigrid Method for Solving FEM Matrix E-quations for 3D Static Problems[J].IEEE Transac-tions on Magnetics,1999,35(3):1183.
    [3]魏健.多重网格方法在结构动态响应有限元分析中的应用[D].吉林:吉林大学,2006.WEI Jian.The Applicaton of multi-grid Method in theStructural Dynamics Response Finite Element Analy-sis[D].Jilin:Jilin University,2006.(in Chinese)
    [4]王勖成.有限单元法[M].北京:清华大学出版社,2003.WANG Xu-cheng.The Finite Element Method[M].Beijing:Tsinghua University Press,2003.(in Chinese)
    [5]徐芝纶.弹性力学[M].北京:高等教育出版社,1990.XU Zhi-guan.Elasticity Mechanics[M].Beijing:Higher Education Press,1990.(in Chinese)
    [6]尹祥础.固体力学[M].北京:地震出版社.1985.YIN Xiang-chu.Solid Mechanics[M].Beijing:Earth-quake Press,1985.(in Chinese)
    [7]De Vivo L,Marotti de Sciarra F.The B-bar Methodand the Limitation Principles[J].International Jour-nal of Solids and Structures,1999,36:5177.
    [8]Zienkiewicz O C,Taylor R L.The Finite ElementMethod(Fifth Edition)Volume 1:The Basis[M].Ox-ford:Published by Butterworth-Heinemann,2000.
    [9]Zienkiewicz O C,Taylor R L.The Finite ElementMethod(Fifth Edition)Volume 2:Solid Mechanics[M].Oxford:Published by Butterworth-Heinemann,2000.