土-结构动力相互作用几种计算模型的比较
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对目前在土-结构动力相互作用分析中基础常采用实体单元、结构采用梁单元,建模过程中经常遇到的基础和结构不同单元的连接问题,通过在基础表面添加刚臂连接单元的方法来模拟基础和结构的连接,并分析对比了实体单元、实体单元-刚臂-梁单元、实体单元-梁单元3种模型在考虑土-结构相互作用时的动力反应,计算结果显示:采用刚臂连接单元方法的计算结果精度与实体单元的相同,但计算效率高。
At present,in the dynamic soil-structure interaction analysis the base is modeled by solid element and the superstructure by beam,the problem of connection between different elements occurs.To solving the connection method of different elements,rigid arm beams are added between the upper beam elements and lower solid elements.Various models are established and the different results are analyzed.Some significative conclusions are drawn out: the calculation results of the model with rigid arm beam elements is similar to the model of solid elements,but more efficient in calculation.
引文
[1]李辉,赖明,白绍良.土-结构动力相互作用研究综述(Ⅱ)-简化分析模型[J].重庆建筑大学学报,1999,25(5):112-116.
    [2]王松涛,曹资.现代抗震设计方法[M].北京:中国建筑工业出版社1997.
    [3]何益斌,夏栋舟,黄欣荣,闫岩.土-桩-框架结构动力相互作用非线性有限元模拟[J].沈阳建筑大学学报,2008,24(3):428-432.
    [4]孙战金,张其林.有限元计算模型过程中不同单元的连接[J].建筑结构.2005,35(9):62-65.
    [5]廖振鹏.工程波动理论导论(第二版)[M].科学出版社.2004.
    [6]孔戈,丁海平,金星,周健,张冬茵.多次透射边界在ANSYS软件中的应用[J].工程抗震与加固改造.2005,27(2):67-70.
    [7]陈波,吕西林,李培振,陈跃庆.用ANSYS模拟结构-地基动力相互作用振动台试验的建模方法[J].地震工程与工程振动,2002,22(1):126-131.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心