剪切阀式磁流变阻尼器的简化设计方法
|
摘要
剪切阀式磁流变(MR)阻尼器传统设计方法将阻尼器的结构设计与磁路设计相互独立,导致阻尼器的设计过程繁琐,且不考虑磁路优化,易引发活塞磁芯饱和现象.针对上述问题,建立了一种简化设计方法.提出了阻尼器磁路设计中磁路优化的2条原则,与阻尼器结构设计的基本参数方程相结合,确定阻尼器结构的基本参数,即将磁路设计与结构设计合为一体,从而简化了阻尼器的设计过程.并对设计的剪切阀式MR阻尼器进行了数值模拟,预估了阻尼器的最大出力和阻尼力可调范围.结果表明,该阻尼器结构合理,既能保证阻尼通道处磁流变液达到饱和,又能有效防止磁芯饱和现象的发生,且最大出力与阻尼力可调范围满足设计要求.此简化设计方法简便、有效、可靠,可作为剪切阀式MR阻尼器工程设计的一种实用方法.
In the traditional design method of shear-valve mode magnetorheological(MR)dampert,he structural design of the damper was independent of the magnetic circuit design,resulting in the design process′being very complicateda;nd the optimization of the magnetic circuit was not given consideration,easily bringing about the saturation phenomenon of magnetic core of piston.In order to simplify the design process and avoid the saturation of magnetic core,a simplified design method of shear-valve mode MR damper was established.Two principles of optimizing the magnetic circuit in the magnetic circuit design of the damper were proposed,and combined with the equations of basic parameters for the structural design of the damper so as to determine the basic parameters of the damper structure.Thats′ to say,the magnetic circuit design and the structural design were combined to simplify the design process of the damper considerably.Then the design of a shear-valve mode MR damper was numerically simulated,and the maximum damping force and the adjustable range of the damping force were predicted.Results indicate that the structure of the damper is reasonable,ensuring that the MR fluid in the damp-ing path reaches saturation and effectively avoiding the occurrence of the saturation phenomenon of magnetic core as well,with its maximum damping force and adjustable range of the damping force meeting the design requirement.This simplified design method is simple,effective and reliable,and may be taken as a practical one for the engineering design of the shear-valve mode MR damper.
In the traditional design method of shear-valve mode magnetorheological(MR)dampert,he structural design of the damper was independent of the magnetic circuit design,resulting in the design process′being very complicateda;nd the optimization of the magnetic circuit was not given consideration,easily bringing about the saturation phenomenon of magnetic core of piston.In order to simplify the design process and avoid the saturation of magnetic core,a simplified design method of shear-valve mode MR damper was established.Two principles of optimizing the magnetic circuit in the magnetic circuit design of the damper were proposed,and combined with the equations of basic parameters for the structural design of the damper so as to determine the basic parameters of the damper structure.Thats′ to say,the magnetic circuit design and the structural design were combined to simplify the design process of the damper considerably.Then the design of a shear-valve mode MR damper was numerically simulated,and the maximum damping force and the adjustable range of the damping force were predicted.Results indicate that the structure of the damper is reasonable,ensuring that the MR fluid in the damp-ing path reaches saturation and effectively avoiding the occurrence of the saturation phenomenon of magnetic core as well,with its maximum damping force and adjustable range of the damping force meeting the design requirement.This simplified design method is simple,effective and reliable,and may be taken as a practical one for the engineering design of the shear-valve mode MR damper.
引文
[1]Spencer B F,Dyke S J,Sain M K,et al.Phenomenologi-cal model for magnetorheological dampers[J].Jour-nal of Engineering Mechanics,ASCE,1997,123(3):230-238.
[2]Yang G,Spencer B F,Carlson J D,et al.Large-scale MR fluid dampers:Modeling,and dynamic performance con-siderations[J].Engineering Structures,2002,24(3):309-323.
[3]Yang G.Large-Scale Magnetorheological Fluid Damper for Vibration Mitigation:Modeling,Testing and Control[D].Indiana:University of Notre Dame,2001.
[4]Dyke S J,Spencer B F,SainM K,et al.An experimental study of magnetorheological dampers for seismic protec-tion[J].Smart Mater Struct,1998,7:693-703.
[5]欧进萍,关新春.磁流变耗能器及其性能[J].地震工程与工程振动,1998,18(3):74-81.Ou Jinping,Guan Xinchun.Magnetorheological fluid dampers and their properties[J].Earthquake Engi-neering and Engineering Vibration,1998,18(3):74-81(in Chinese).
[6]瞿伟廉,樊友川.磁流变液阻尼器的磁路有限元分析与优化设计方法[J].华中科技大学学报,2006,23(3):1-4.Qu Weilian,Fan Youchuan.Magnetic circuit finite ele-ment analysis and optimum design method of a MR damper[J]J.ournal of Huazhong University of Science and Technology,2006,23(3):1-4(in Chinese).
[7]李忠献,吴林林,徐龙河,等.磁流变阻尼器的构造设计及其阻尼力性能的试验研究[J].地震工程与工程振动,2003,23(1):128-132.Li Zhongxian,Wu Linlin,Xu Longhee,t al.Structural design of MR damper and experimental study for per-formance of damping force[J].Earthquake Engineer-ing and Engineering Vibration,2003,23(1):128-132(in Chinese).
[8]Li Zhongxian,Xu Longhe.Performance tests and hystere-sis model of MRF-04K damper[J].Journal of Struc-tural Engineering,ASCE,2005,131(8):1303-1306.
[9]欧进萍.结构振动控制:主动、半主动和智能控制[M].北京:科学出版社,2003.Ou Jinping.Structure Vibration Control:Active,Semi-Active and Smart Control[M].Beijing:Science Press,2003(in Chinese).
[10]张红辉,廖昌荣,陈伟民,等.磁流变阻尼器磁路设计及磁饱和有限元分析[J].功能材料与器件学报,2004,10(4):493-497.Zhang Honghui,Liao Changrong,Chen Weimine,t al.Magnetic design of MR damper and FEM analysis on saturation[J]J.ournal of Functional Materials and De-vices,2004,10(4):493-497(in Chinese).
[2]Yang G,Spencer B F,Carlson J D,et al.Large-scale MR fluid dampers:Modeling,and dynamic performance con-siderations[J].Engineering Structures,2002,24(3):309-323.
[3]Yang G.Large-Scale Magnetorheological Fluid Damper for Vibration Mitigation:Modeling,Testing and Control[D].Indiana:University of Notre Dame,2001.
[4]Dyke S J,Spencer B F,SainM K,et al.An experimental study of magnetorheological dampers for seismic protec-tion[J].Smart Mater Struct,1998,7:693-703.
[5]欧进萍,关新春.磁流变耗能器及其性能[J].地震工程与工程振动,1998,18(3):74-81.Ou Jinping,Guan Xinchun.Magnetorheological fluid dampers and their properties[J].Earthquake Engi-neering and Engineering Vibration,1998,18(3):74-81(in Chinese).
[6]瞿伟廉,樊友川.磁流变液阻尼器的磁路有限元分析与优化设计方法[J].华中科技大学学报,2006,23(3):1-4.Qu Weilian,Fan Youchuan.Magnetic circuit finite ele-ment analysis and optimum design method of a MR damper[J]J.ournal of Huazhong University of Science and Technology,2006,23(3):1-4(in Chinese).
[7]李忠献,吴林林,徐龙河,等.磁流变阻尼器的构造设计及其阻尼力性能的试验研究[J].地震工程与工程振动,2003,23(1):128-132.Li Zhongxian,Wu Linlin,Xu Longhee,t al.Structural design of MR damper and experimental study for per-formance of damping force[J].Earthquake Engineer-ing and Engineering Vibration,2003,23(1):128-132(in Chinese).
[8]Li Zhongxian,Xu Longhe.Performance tests and hystere-sis model of MRF-04K damper[J].Journal of Struc-tural Engineering,ASCE,2005,131(8):1303-1306.
[9]欧进萍.结构振动控制:主动、半主动和智能控制[M].北京:科学出版社,2003.Ou Jinping.Structure Vibration Control:Active,Semi-Active and Smart Control[M].Beijing:Science Press,2003(in Chinese).
[10]张红辉,廖昌荣,陈伟民,等.磁流变阻尼器磁路设计及磁饱和有限元分析[J].功能材料与器件学报,2004,10(4):493-497.Zhang Honghui,Liao Changrong,Chen Weimine,t al.Magnetic design of MR damper and FEM analysis on saturation[J]J.ournal of Functional Materials and De-vices,2004,10(4):493-497(in Chinese).
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心