基于独立分量分析的爆破振动信号分离仿真试验

英文篇名：Simulation Experiment of Separation of Blasting Vibration Signal based on ICA Method
中文刊名：爆破
英文刊名：Blasting
作者：易长平 ; 赵明生 ; 崔正荣
英文作者：YI Chang-ping1 ; ZHAO Ming-sheng1 ; CUI Zheng-rong2 (1.School of Resources and Environmental Engineering ; Wuhan University of Technology ; Wuhan 430070 ; China ; 2.Department of Mining Engineering ; Sinosteel Maanshan Institute of Mining Research ; Maanshan 243004 ; China)
中文关键词：爆破振动 ; 独立分量分析 ; 仿真试验
英文关键词：blasting vibration ; ICA ; simulation experiment
出版日期：2010-03-15
机构：武汉理工大学资源与环境工程学院;中钢集团马鞍山矿山研究院有限公司采矿研究所;
年：2010
期：01
出版单位：爆破

摘要

爆破振动信号分析是研究爆破振动特性的重要手段,而实测爆破振动信号往往是多个振源信号的叠加信号,分离出每个振源或特定振源的振动信号对于其振动特性的研究具有重要意义。选取实测的爆破振动信号,进行线性混合得到混合信号,利用独立分量分析(ICA)对混合信号进行分离,获取了与源信号波形基本一致的分离信号,仿真试验表明ICA适合爆破振动信号的分离。
Analysis of blasting vibration signal is an important method for studying blasting vibration characteristic,but the monitored signals of blasting vibration usually are aliasing signals of multi-vibration sources,separating the vibration signal of each or special vibration source from the aliasing signal is important to study the characteristic of the vibration source.Some monitored signals of blasting vibration are chosen to linear blending and independent component analysis(ICA) method is employed to separate the mixed signal;the separating signal is uniform to the origin signal in waveform,which shows ICA method is suitable for separating blasting vibration signals.

引文

[1]凌同华,李夕兵,戴塔根,等.基于小波变换的微差爆破震动信号分离法[J].地下空间与工程学报,2006,2(3):491-494.
    [2]刘喜武,刘洪,李幼铭.独立分量分析及其在地震信息处理中应用初探[J].地球物理学进展,2003,18(1):90-96.
    [3]刘婷婷,任兴民.独立分量分析在机械振动信号分离中的应用[J].振动测试与诊断,2009,29(1):36-42.
    [4]马建仓,牛奕龙,陈海洋.盲信号处理[M].北京:国防工业出版社,2006.
    [5]张启发,张斌,张喜斌.盲信号处理及应用[M].西安:西安电子科技大学出版社,2006.
    [6]HYVARINEN A.Survey on Independent Component A-nalysis[J].Neural Computing Surveys,1999(2):94-128.
    [7]徐红梅.内燃机振声信号时频特性分析及源信号盲分离技术研究[D].杭州:浙江大学,2008.
    [8]CHENG Yin-ming,XU Lei.Independent Component Or-dering in ICA Time Series Analysis[J].Neurocomputing,2001(41):145-152.