浅谈钢结构工业厂房的抗震设计
|
摘要
从结构选型、高度限制、抗震原理等方面入手,探讨了钢结构工业厂房的抗震设计,着重阐述了防震缝、钢柱脚、截面及楼盖等关键环节的设计要点,并强调了钢结构厂房的结构布置注意事项,以指导实践。
From the structural type selection,the high limitation and the anti-seismic principle,the paper explores the anti-seismic design of the industrial workshop of steel structure,illustrates the design points of the key steps including the anti-seismic joint,steel column base,section and building roof,and emphasizes on the precautions for the structural layout of the steel-structure workshop,so as to direct the practice.
From the structural type selection,the high limitation and the anti-seismic principle,the paper explores the anti-seismic design of the industrial workshop of steel structure,illustrates the design points of the key steps including the anti-seismic joint,steel column base,section and building roof,and emphasizes on the precautions for the structural layout of the steel-structure workshop,so as to direct the practice.
引文
[1]GB 50011-2010,建筑抗震设计规范[S].
[2]JGJ/T 97/95,工程抗震术语标准[S].
[3]GB 50223-2008,建筑工程抗震设防分类标准[S].
[4]夏伟,陈晓强.某电厂钢结构厂房的地震动力弹塑性分析[J].山西建筑,2010,36(8):67-68.
[2]JGJ/T 97/95,工程抗震术语标准[S].
[3]GB 50223-2008,建筑工程抗震设防分类标准[S].
[4]夏伟,陈晓强.某电厂钢结构厂房的地震动力弹塑性分析[J].山西建筑,2010,36(8):67-68.
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心