基于混合控制的某多层框架结构抗震性能分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
本文采用基础隔震及MR阻尼器混合控制,对某5层框架结构抗震性能进行了研究.通过在simulink中建立采用模糊逻辑控制器的动态仿真系统,对混合控制结构和MR半主动控制结构的抗震性能进行了分析对比.结果表明,混合控制结构对顶层位移和速度反应较MR半主动控制结构均有明显的降低.
The article studies the earthquake-resistance performance of a 5 floors frame,with the blending control of base isolation and MR damper.The thesis carried analyzed earthquake-resistance performance contrast on hybrid control structure and MR semi-active control structure,modeling dynamic simulation system with fuzzy logic controller in Simulink.Theoretic show: the reaction about displacement and speed of hybrid control structure are smaller than MR semi-active control structure.
引文
[1]徐赵东,郭迎庆.MATLAB语言在建筑抗震工程中的应用[M].北京:科学出版社,2004:217-219,220-222.
    [2]罗登贵,雷静雅,汲军广.房屋建筑基础设置磁流变阻尼器的半主动控制[J].武汉理工大学学报,2009,31(6):47-50.
    [3]郭圣权,毕效辉.现代控制理论[M].北京:中国轻工业出版社,2007:132-133.
    [4]邓光.建筑结构设置磁流变阻尼器和基础隔震的混合控制研究[J].辽宁科技学院学报,2006,8(1):7-8.
    [5]刘强,邹祖军.基于SIMULINK仿真的基础隔震-PTMD混合控制结构的抗震分析[J].佳木斯大学学报(自然科学版),2007,25(4):449-451.
    [6]陈水生,李锦华.磁流变阻尼器对建筑结构地震响应半主动控制分析[J].铁道工程学报,2007,9(9):40-45.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心