基于性态的磁流变智能隔震结构设计研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对磁流变智能隔震结构的减震特点,提出了一种基于性态设计的抗震设计方法。该设计方法对结构在不同烈度下地震反应,设定了不同的性态设计水平和相应的性态设计指标,并给出了完整的设计过程。设计算例证明,按此设计过程设计出的磁流变智能隔震结构,满足给定各性态设计水平下对不同地震反应下的设计指标限值要求,设计结果达到了安全合理的抗震设计要求,因而证明该设计方法是可行和有效的。
A performance-based seismic design for a smart isolation structure with magnetorheological (MR) damper was given. The design method offered different performance level and performance index for structural seismic responses under different earquake intensity. Complex design processes also were presented. Design example proved the design process for a smart isolation structure with magnetorheological damper met the limited value requirements of performanc index under different performance levels and the design results met earquake-resistance design requirements. So the proposed design method is feasible and effective.
引文
[1]付伟庆.磁流变智能隔震与橡胶垫高层隔震的理论与试验研究[D].哈尔滨:哈尔滨工业大学土木工程学院,2005.
    [2]Ou Jinping,Guan Xinchun.Magnetorheological Fluid and smart damper for structure vibration control[J].Earthquake Engineering and Engineering Vibration.1998,18(3):74-81.
    [3]付伟庆,张永山.磁流变阻尼器被动隔震振动台试验研究[J].沈阳建筑大学学报(自然科学版),2006,22(2):196-199.
    [4]胡聿贤.地震工程学(第二版)[M].北京:地震出版社,2006,303-305.
    [5]谢礼立,马玉宏.基于抗震性态的设防标准研究[J].地震学报,2002,24(2):200-209.
    [6]CECS160:2004,《建筑工程抗震性态设计通则(试用)》[S].
    [7]GB2001-2001,《建筑抗震设计规范》[S].
    [8]周福霖.工程结构减震控制[M].北京:地震出版社,1996.
    [9]Wang Huanding,Geng Shuwei,Wang Wei.High order single step time delay compensation algorithm for structural active control[J].Journal of Harbin Institute of Technology,2002,19(4):336-342.
    [10]欧进萍.结构振动控制——主动、半主动和智能控制[M].北京:科学出版社,2003.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心