永磁型磁流变液极限转矩联轴器的设计分析

英文篇名：A Kind of New Limit Permanent Magnet Fluid Coupling′s Design and Analysis
中文刊名：机械科学与技术
英文刊名：Mechanical Science and Technology for Aerospace Engineering
作者：雷阳 ; 李友荣 ; 吕晶
英文作者：Lei Yang ; Li Yourong ; Lü Jing(The Key Laboratory for Metallurgical Equipment and Control of Ministry of Education ; Wuhan University of Science and Technology ; Wuhan 430081)
中文关键词：磁流变液 ; 永磁 ; 联轴器 ; 优化设计 ; 极限转矩
英文关键词：magnetorheological fluid ; permanent magnets ; coupling ; optimal design ; limit torque
出版日期：2012-02-15
机构：武汉科技大学冶金装备及其控制教育部重点实验室;
年：2012
期：02
出版单位：机械科学与技术

摘要

利用磁流变液这种智能材料设计制作的磁流变器件近年来在各领域广泛应用,但作为冶金设备传动部件的研究较少,提出采用永磁铁作为磁源的圆筒式磁流变液极限转矩联轴器,并进行设计分析。依据理论模型条件,讨论了新型联轴器的工作原理、结构设计、磁路设计、优化结构参数的方法;根据磁流变液的Bingham模型、动量方程,推导出永磁型磁流变液联轴器转矩的计算公式。
In recent years smart materials of magneto-rheological fluid are widely used in various fields.However,few studies focus on the metallurgical equipment driving parts.For a rolling mill roller driving system,the limit torque cylindrical magneticfluid coupling was designed and analyzed in this paper using the permanent magnets as the magnetic source.Based on the principle of permanent magnetic fluid coupling,structural design and method of the optimizing structure parameters were discussed;according to the Bingham model,the momentum equation and torque calculation formula of permanent magnetic fluid coupling were derived for further design of the coupling.

引文

[1]Kordonski W I,Golini D.Fundamentals of magnetorheol-ogicalfluid utilization in high precision finishing[J].Intelligent Mate-rial Systems and Structures,2001,(9):683～689
    [2]汪建晓,孟光.磁流变液装置及其在机械工程中的应用[J].机械强度,2001,23(1):50～56
    [3]Jolly M R,et al.Properties and applications of commercial mag-netorheological fluids[J].Intelligent Material Systems andStructures,2000,10(11):5～13
    [4]瞿伟廉.500kN足尺磁流变液阻尼器设计的关键技术[J].地震工程与工程振动,2007,(4):124～130
    [5]王玉良,孙春一.永磁联轴器的磁路结构及其特性[J].磁性材料及器件,2005,(8):9～11
    [6]孟维佳.双平板式磁流变液离合器的设计与研究[D].哈尔滨工业大学,2006
    [7]崔亮.基于磁流变技术的离合器设计、控制及实验研究[D].南京理工大学,2008
    [8]唐任远.现代永磁电机理论与设计[M].机械工业出版社,1997
    [9]蒋建东.磁流变传动技术及器件的研究[D].重庆大学,2004
    [10]Spencer B F.Phenomenological model of a magnetorheolo-gicaldamper[J].Journal of Engineering Mechanics,1996:230～238
    [11]Usob Lee,Doh Y K,Nahmkeon H.Design analysis and exper-mental evaluation of an MR fluidcluth[J].Journal of Intelli-gent Material Systems and Structures,1999:701～707
    [12]曹卫东.悬浮式磁力泵设计方法的研究[D].江苏大学,2003
    [13]黄金,廖清林.圆筒式磁流变液联轴器的设计分析[J].功能材料,2006,37(5):60～64