15×10~4m~3立式储罐隔震设计分析

英文篇名：Design and analysis of seismic isolation for 15×10~4 m~3 vertical storage tank
中文刊名：地震工程与工程振动
英文刊名：Journal of Earthquake Engineering and Engineering Vibration
作者：孙建刚 ; 崔利富 ; 赵长军 ; 张营
英文作者：SUN Jiangang1 ; 2 ; CUI Lifu2 ; ZHAO Changjun3 ; ZHANG Ying3(1.College of Civil and Architecture Engineering ; Dalian Nationalities University ; Dalian 116600 ; China ; 2.Institute of Road and Bridge Engineering ; Dalian Maritime University ; Dalian 116026 ; China ; 3.College of Civil and Architecture Engineering ; Northeast Petroleum University ; Daqing 163318 ; China)
中文关键词：储罐 ; 数值仿真分析 ; 隔震设计 ; 液固耦合频率 ; 晃动频率
英文关键词：storage tank ; numerical simulation analysis ; seismic isolation design ; liquid-solid coupling ffrequency ; sloshing frequency
出版日期：2010-08-15
机构：大连民族学院土木建筑工程学院;大连海事大学道路与桥梁工程研究所;东北石油大学土木建筑工程学院;
年：2010
期：04
出版单位：地震工程与工程振动

摘要

为了研究15×104m3立式储罐隔震设计影响因素,采用有限元数值仿真技术,分析了隔震刚度、浮顶质量、储液密度、罐壁厚度、罐壁的材料弹性模量、储液高度与罐半径比值对储罐的晃动频率和液固耦合频率的影响并与时程分析对照。结果表明:储罐液固耦合振动频率对隔震刚度敏感,隔震刚度较低时,液固耦合刚度的下降,使基底剪力变小;隔震刚度对储罐的液体晃动频率的影响不大,在一定的隔震周期范围内,波高无放大效应;隔震设计时,浮顶的影响可忽略;储液高度与储罐半径比对储罐的液固耦合频率和晃动频率影响较大,隔震设计时存在优化段;储液密度、罐壁厚度、材料弹性模量,隔震设计时可不考虑其影响,进行地震动台实验时,可考虑用其他材料代替钢材,不影响分析结果。
In order to study the factors of seismic isolation design for 15×104 m3 vertical storage tank,the finite element numerical simulation is used to analyze the effects of isolation stiffness,floating roof quality,reservoir fluid density,tank wall thickness,tank wall material elastic modulus,and liquid storage tank height to radius ratio of the tanks on sloshing frequency and liquid-solid coupling ffrequency.Comparison with the time-history analysis results show that: the liquid-solid coupling vibration frequency is sensitive to isolation stiffness.When the isolation stiffness is lower,the liquid-solid coupling stiffness declines and the base shear force becomes small.Isolation stiffness of the tanks hardly affects the frequency of liquid sloshing.In a certain range of the isolation period,the wave height has no amplification effect.In isolation design,the effects of the floating roof can be neglected.The ratio of the storage tank liquid height to the radius of the tank greatly affects the frequency of the liquid-solid coupling and the shaking frequency.The isolation has the design optimization segmentally.The effects of reservoir fluid density,tank wall thickness,material elastic modulus can be neglected.For shaking table test,other materials may be considered to replace the steel and the analysis results do not be affected.

引文

[1]孙建刚.立式储罐地震响应控制研究[D].哈尔滨:中国地震局工程力学研究所,2002.
    [2]孙建刚,张丽,袁朝庆.立式储罐基底隔震动力反应特性分析[J].地震工程与工程振动,2001,21(3):140-144.
    [3]Chalhoub MS,Kelly J M.Shake table test of cylindral water tank in base isolated structures[J].Journal of Structural Engineering,ASCE,1990,116(7):1451-1472.
    [4]Kim N S,Lee D G.Pseudo-dynamic test for evalution of seismic performance of base isolated liquid storage tanks[J],Engineering Strcuctures,1995,17(3):198-208.
    [5]Malhotra P K.New method for seismic base isolation of liquid storage tanks[J].Earthquake Engineering and Structural Dynamics,1997,26:839-847.
    [6]Shrimali MK,Jangid R S.Seismic response of base-isolated liquid storage tanks[J].Journal of Vibration&Control,2003,9(10):1201-1217.
    [7]Jadhav MB,Jangid R S.Response of base-isolated liquid storage tanks[J].Shock and Vibration,2004,11:33-45.
    [8]Malhotra P K.Seismic strengthening of liquid-storage tanks with energy-dissipating anchors[J].Structure Engineering,ASCE,1998,124(4):405-414.
    [9]Wang Y P,Teng MC,Chung KW.Seismic isolation of rigid cylindrical tanks using friction pendulum bearing[J].Earthquake Engineering andStructural Dynamics,2001,30:1083-1099.
    [10]Shrimali MK,Jangid R S.Seismic response of liquid storage tanks isolated by sliding bearings[J].Eng.Strcut,2002,24(7):907-919.
    [11]GB 50341-2003立式圆筒形钢制焊接油罐设计规范-附录D油罐抗震计算[S].2003.