附加粘弹性阻尼墙结构设计应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
利用结构设计软件Etabs对某部委全钢结构的办公大楼进行分析。原结构采用框架偏心支撑体系,有控结构则以粘弹性阻尼墙取代部分支撑,对2种结构体系在各种地震加速度峰值作用下的各项性能指标进行分析比较,得出结论:粘弹性阻尼墙可以有效减小结构的地震反应,提高了结构的抗震性能,且满足规范的各项要求。
Carried on the analysis of some all steel structure office building by using structural design software Etabs.The original structure uses frame bias supporting system,and some part of supporting is substituted by the viscoelastic damping wall.carries on the analysis Compared the performances of two kinds of structure systems under different kinds of earthquake acceleration peak values,draws the conclusion: The viscoelastic damping wall can effectively reduce the structure's earthquake response,enhanced the structure's earthquake resistance performance,and satisfies the related requests of standards.
引文
[1]周锡元,吴育才.工程抗震的新发现[M].北京:清华大学出版社,暨南大学出版社,2002:130-133.
    [2]常业军.粘弹性阻尼器及消能减震结构的研究与应用[D].东南大学博士学位论文,2003,3.
    [3]周云,徐赵东,赵鸿铁.粘弹性阻尼结构的性能、分析方法及工程应用[J].地震工程与工程振动,1998(3).
    [4]欧进萍,邹向阳.高层钢结构粘弹性耗能减振试验与分析[J].哈尔滨建筑大学学报,1999,12(4):1-6.
    [5]GB50011-2010建筑抗震设计规范[S].中国建筑工业出版社,2010.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心