标准《高压开关设备和控制设备的抗震要求》存在的问题及建议
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
GB/T 13540—2009《高压开关设备和控制设备的抗震要求》为新修订的国家标准,促进了IEC系列标准在中国的推广和应用。结合我国的实际情况,从高压开关和控制设备的抗震设防目标、设防水准、需求响应谱等方面指出了该标准存在的问题。通过典型地区的概率地震危险性分析,提出了电气设备抗震性能水平选取的修改建议。对需求响应谱的适用性、动力放大系数最大值、特征周期、不同阻尼比反应谱转换关系进行了分析,希望所提建议能为相关规范标准的修订提供参考。
"Seismic qualification for high-voltage switchgear and controlgear"(GB/T13540—2009) is a newly revised recommended Chinese national standard that promotes the popularization and application of serial IEC standards in China.Based on the actual situation in China,the defects existing in this revised standard,such as seismic fortification goal and level and required response spectrum(RRS) and so on,are pointed out.Through the analysis on probabilistic seismic hazard at typical region,some modification proposals on the selection of seismic performance levels of electrical equipments are put forward.The applicability of RSS,the maximum dynamic amplification coefficient,the characteristic period and the transfer relationship among response spectra with different damping ratios are analyzed.It is wished that these proposals could be available for reference to the revision of relevant codes and standards.
引文
[1]汪洋,杨太华,曹加良.我国电力系统的地震灾害及应对机制[J].上海电力学院学报,2011,27(5):451-454.Wang Yang,Yang Taihua,Cao Jialiang.Research on seismic disasterand emergency response of electric power grid[J].Journal of ShanghaiUniversity of Electric Power,2011,27(5):451-454(in Chinese).
    [2]中国电机工程学会,地震对电力设施影响及应对调研报告[R].北京:中国电机工程学会,2009.
    [3]尤红兵,赵凤新,刘锡荟.美国《变电站抗震设计推荐规程》评介[J].电力建设,2009,30(6):43-47.You Hongbing,Zhao Fengxin,Liu Xihui.Introduction ofrecommended code of substation aseismatic design USA[J].ElectricPower Construction,2009,30(6):43-47(in Chinese).
    [4]程永锋,朱全军,卢智成.变电站电力设施抗震措施研究现状与发展趋势[J].电网技术,2008,32(22):84-89.Cheng Yongfeng,Zhu Quanjun,Lu Zhicheng.Progress anddevelopment trend on seismic measures of electric power equipmentsin transformer substation[J].Power System Technology,2008,32(22):84-89(in Chinese).
    [5]杨少勇,赵建国.电力系统地震灾害预防技术综述[J].电网技术,2010,34(8):57-63.Yang Shaoyong,Zhao Jianguo.An overview on prevention technologyof earthquake disaster for power grids[J].Power System Technology,2010,34(8):57-63(in Chinese).
    [6]贺海磊,郭剑波,谢强.电气设备的地震灾害易损性分析[J].电网技术,2011,35(4):25-28.HE Hailei,Guo Jianbo,Xie Qiang.Vulnerability analysis of powerequipments caused by earthquake disaster[J].Power SystemTechnology,2011,35(4):25-28(in Chinese).
    [7]谢强,朱瑞元,屈文俊.汶川地震中500kV大型变压器震害机制分析[J].电网技术,2011,35(3):221-226.Xie Qiang,Zhu Ruiyuan,Qu Wenju.Analysis on seismic failuremechanism of 500 kV high-power transformer during Wenchuanearthquake[J].Power System Technology,2011,35(3):221-226(inChinese).
    [8]杨德昌,李勇,Rehtanz C,等.中国式智能电网的构成和发展规划研究[J].电网技术,2009,33(20):13-20.Yang Dechang,Li Yong,Rehtanz C,et al.Study on the structure andthe development planning of smart grid in China[J].Power SystemTechnology,2009,33(20):13-20(in Chinese).
    [9]GB/T13540—2009高压开关设备和控制设备的抗震要求[S].北京:中国标准出版社,2010.
    [10]International Electrotechnical Commission.IEC 62271-2 High-voltageswitchgear and controlgear–Part 2:Seismic qualification for ratedvoltages of 72.5 kV and above[S].Geneva:IEC,2003.
    [11]International Electrotechnical Commission.IEC 62271-300 Seismicqualification of alternating current circuit-breakers[S].Geneva:IEC,2006.
    [12]International Electrotechnical Commission,IEC 62271-207 High-voltage switchgear and controlgear–Part 207:Seismic qualification forgas-insulated switchgear assemblies for rated voltages above 52 kV[S].Geneva:IEC,2007.
    [13]Eric Fujisaki.Seismic design standards for electric substationequipment[C]//TCLEE 2009:Lifeline Earthquake Engineering in aMultihazard Environment,2009:296-307.
    [14]IEEE Standard 693—2005.Recommended practice for seismic designof substations[S].New York:IEEE,2005.
    [15]尤红兵,张郁山,赵凤新.电气设备振动台试验输入的合理确定[J].电网技术,2012,36(5):118-124.You Hongbing,Zhang Yushan,Zhao Fengxin.Reasonabledetermination of input waves for shake-table test of electricalequipments[J].Power System Technology,2012,36(5):118-124(inChinese).
    [16]Lu Zhicheng,Dai Zebing,Zhu Zhubing.Parameter study of loadcombinations in seismic design for UHV transformation devices[C]//International Conference on Power System Technology.Hangzhou:IEEE/PES and CSEE,China Electric Power Research Institute(CEPRI),2010:2144-2149.
    [17]Ji Ye,Zhu Zhubing,Lu Zhicheng.Research on dynamic amplificationfactor of 1000kV transformation device supporting structures[C]//International Conference on Power System Technology.Hangzhou:IEEE/PES and CSEE,China Electric Power Research Institute(CEPRI),2010:2129-2133.
    [18]解琦,郝际平,张文强,等.日中美抗震规范中电气设备抗震设计研究[J].世界地震工程,2009,25(4):188-193.Xie Qi,Hao Jiping,Zhang Wenqiang,et al.Comparative study onseismic design between Chinese,American and Japanese seismicdesign codes of electric power facilities[J].Word EarthquakeEngineering,2009,25(4):188-193(in Chinese).
    [19]GBT2424.25—2000电工电子产品环境试验第三部分试验导则地震试验方法[S].北京:中国标准出版社,2000.
    [20]中华人民共和国国家标准,GB50267—1997核电厂抗震设计规范[S].北京:中国计划出版社,1998.
    [21]International Electrotechnical Commission,IEC68-3-3 Environmentaltesting Part 3:Guidance Seismic test methods for equipment[S].Geneva:IEC,1991.
    [22]International Conference of Building Officials.UBC1997 uniformbuilding code[S].Whittier,CA,1997.
    [23]邵辉,美国设计规范IBC2000和UBC97对抗震设计的差异浅析[J].医药工程设计,2009,30(4):53-56.Shao Hui.Analysis of differences between American design code IBC2000 and UBC 97 for seismic design[J].Pharmaceutical&Engineering Design,2009,30(4):53-56(in Chinese).
    [24]中华人民共和国国家标准,GB17741—2005工程场地地震安全性评价[S].北京:地震出版社,2005.
    [25]中华人民共和国国家标准,GB18306—2001中国地震动参数区划图[S].北京:地震出版社,2001.
    [26]GB50260—201X电力设施抗震设计规范(报批稿)[S].2012.
    [27]ETG A.0.21—2005,Dise o sísmico de estructuras de subestaciones,Especificación de Transelec,para cálculo de solicitaciones sísmicassobre estructuras y fundaciones de subestaciones[S].ENDESA:Santiago de Chile,2005
    [28]NRC RG 1.60—1973,Design response spectra for seismic design ofnuclear power plants[S].U.S.Atomic Energy Commission,1973.
    [29]周锡元,王广军,苏经宇.场地分类和平均反应谱[J].岩土工程学报,1984,6(5):59-68.Zhou Xiyuan,Wang Guangjun,Su Jingyu.Site classification andaverage response spectra[J].Chinese Journal of GeotechnicalEngineering,1984,6(5):59-68(in Chinese).
    [30]毛天尔,曾双双,栾极,等.抗震设计反应谱的动力放大系数[J].土木工程与管理学报,2012,29(1):89-92.Mao Tian’Er,Zeng Shuangshuang,Luan Ji,et al.Dynamicamplification coefficient of seismic design response spectrum[J].Journal of Civil Engineering and Management,2009,29(1):89-92(in Chinese).
    [31]中华人民共和国国家标准,GB50260—1996电力设施抗震设计规范[S].北京:中国计划出版社,1996.
    [32]中华人民共和国国家标准,GB50556—2010工业企业电气设备抗震设计规范[S].北京:中国计划出版社,2010.
    [33]GB/T2423.48—2008电工电子产品环境试验第2部分:试验方法试验Ff:振动——时间历程法[S].北京:中国标准出版社,2008.
    [34]中华人民共和国国家标准,GB50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.尤红兵

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心