循环荷载作用下黏土改进边界面模型
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
为克服边界面模型应用不便、不能反映卸载过程中土体的弹塑性性质的缺陷,提出了一个循环荷载作用下可考虑弹塑性加、卸载过程的重塑黏土改进边界面模型。模型采用了简单的边界面形式,可大大简化该模型理论的推导与计算;采取了不预先定义边界面大小的方式,有效地降低了改进边界面模型在应用过程中的经验性;加入边界面胀缩规则,使模型可考虑土样卸载过程中的弹塑性性质,进而可反映土样的滞回特性。通过对重塑黏土进行循环三轴数值模拟试验,并与真实试验结果进行对比分析,验证了改进边界面模型的合理性和有效性。数值验证结果表明,改进边界面模型具有物理意义明确、参数易于确定、形式相对简单的特点,且该模型计算精度较高,计算结果与试验结果吻合得较好。
This paper proposes an improved bounding surface model for remolded clay, which overcomes the defects that it is inconvenience to apply and not related with elastoplastic property in the unloading process of the bounding surface model, by considering elastoplastic loading and unloading processes under cyclic loading. The model uses a simple bounding surface formula,which significantly simplifies the derivation and calculation of the model; which also effectively reduces the empirical dependence in the application process of the improved bounding surface without predefining the bounding surface. It introduces bounding surface expansion and contraction rules, which makes the model consider the elastoplastic property of the soil in the unloading process and then reflects the hysteretic behavior of the soil. This improved bounding surface model is verified by comparison between numerical simulation of remolded clay cyclic triaxial test and the cyclic triaxial lab test. The results show that the improved bounding surface has following advantages: clear physical significance and simple form, parameters easy to determine, high precision of calculation and the calculation results fitting the real test results.
引文
[1]KAYNIA A M,MADSHUS C,ZACKRISSON P.Ground vibration from high-speed trains:prediction and countermeasure[J].Journal of Geotechnical and Geoenviromental Engineering,ASCE,2000,126(6):531-537.
    [2]王军.单、双向激振循环荷载作用下饱和软黏土动力特性研究[D].杭州:浙江大学,2007.
    [3]杨庆,王猛,栾茂田.非饱和粉土静、动强度对比试验研究[J].岩土力学,2010,31(1):71-80.YANG Qing,WANG Meng,LUAN Mao-tian,et al.Experimental research of correlation on static and dynamic strengths of unsaturated silty clay[J].Rock and Soil Mechanics,2010,31(1):71-80.
    [4]DAFALIAS Y F.Bounding surface plasticity I:Mathematical foundation and hypoplasticity[J].Journal of Engineering Mechanics,ASCE,1986,112(9):966-987.
    [5]DAFALIAS Y F,HERRMANN L R.Bounding surface plasticity II:Application to isotropic cohesive soils[J].Journal of Engineering Mechanics,ASCE,1986,112(12):1263-1291.
    [6]ANADARAJAH A,DAFALIAS Y F.Bounding surface plasticity III:Application to anisotropic cohesive soils[J].Journal of Engineering Mechanics,ASCE,1986,112(12):1292-1319.
    [7]LIANG R Y,MA F.Anisotropic plasticity model for undrained cyclic behavior of clays I:Theory[J].Journal of the Geotechnical Engineering,1992,118(2):229-245.
    [8]周健,孙吉主,吴世明.往复荷载下软土的边界面广义弹塑性模型[J].岩石力学与工程学报,2002,21(2):210-214.ZHOU Jian,SUN Ji-zhu,WU Shi-ming.Elasto-plastic model of soft clay under reversal load[J].Chinese Journal of Rock Mechanics and Engineering,2002,21(2):210-214.
    [9]刘明.饱和软黏土动力本构模型研究与地铁隧道长期振陷分析[D].上海:同济大学,2006.
    [10]秦立科.非饱和黄土动力本构模型及其在地铁车站地震反应分析中的应用[D].西安:长安大学,2010.
    [11]徐舜华,郑刚,徐光黎.循环荷载下砂土的剪切硬化边界面本构模型[J].岩土力学,2010,31(1):1-8.XU Shun-hua,ZHENG Gang,XU Guang-li.A bounding surface constitutive model of sands with shear hardening[J].Rock and Soil Mechanics,2010,31(1):1-8.
    [12]柳艳华,黄茂松,李帅.循环荷载下结构性软黏土的各向异性边界面模型[J].岩土工程学报,2010,32(7):1065-1071.LIU Yan-hua,HUANG Mao-song,LI Shuai.An anisotropic bounding surface model for structured clay under cyclic loading[J].Chinese Journal of Geotechnical Engineering,2010,32(7):1065-1071.
    [13]LI T,MEISSNER H.Two-surface plasticity model for cyclic undrained behavior of clays[J].Journal of Geotechnical and Geoenvironmental Engineering,ASCE,2002,128(7):613-626.
    [14]李兴照.饱和软黏土的流变和循环流变特性研究[D].上海:同济大学,2005.
    [15]SCHOFIELD A N,WROTH C P.Critical state soil mechanics[M].New York:Mc Graw-Hill Book Company Limited,1968.
    [16]李剑.高铁列车荷载作用下红黏土地基动力响应研究[D].武汉:中国科学院大学武汉岩土力学研究所,2013.
    [17]MASING G.Eigenspannungeu und verfertigung bim Messing[C]//Proceedings of the 2nd International Congress on Applied Mechanics.Zurich:[s.n.],1926.
    [18]MANZARI M T,NOUR M A.On implicit integration of bounding surface plasticity models[J].Computers and Structures,1997,63(3):385-392.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心