隔震结构设计方法研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
随着隔震技术在高烈度区越来越多的应用,对隔震结构的合理设计方法及流程化的重要逐渐凸显。结合云南某酒店工程中隔震结构设计的一般流程,即前期方案比选阶段、上部结构设计阶段和隔震系统设计阶段,阐述了隔震结构的设计方法。前期方案比选阶段主要是隔震技术的可行性、经济性、适用性分析,上部结构设计阶段需要注意地震力的取值、合理的模型建立、隔震支座上一层的刚度等,隔震系统设计阶段主要包括隔震支座的选型与布置、上、下支墩尺寸的设计。
With the application of base isolation being used more and more frequently,the importance of reasonable design method and process standardization is obvious.According to a real project in Kunming,the basic design method and checkpoints in the whole design process were introduced.This design process includes analysis of feasibility and economy at the beginning period of the project,the designing of the upper structure in which the reasonable seismic force and calculated model should be paid attention and the base isolation system designing,including figuration of isolation units,buttress designing.
引文
[1]杨迪雄,李刚,程耿东.隔震结构的研究概况和主要问题[J].力学进展,2003(03):302-312.
    [2]吴兵,冯沛芸.中国隔震技术浅析[J].深圳大学学报,2003(2):79-84.
    [3]日本建筑学会.隔震结构设计[M].刘文光译.北京:地震出版社,2006.
    [4]日本免震构造协会.图解隔震结构入门[M].叶列平译.北京:科学出版社,1998.
    [5]GB 50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
    [6]11G101—1混凝土结构施工图平面整体表示方法制图规则和构造详图(现浇混凝土框架、剪力墙、梁、板)[S].北京:中国计划出版社,2011.
    [7]UBC-97 Uniform Building Code 1997[S].America;International Conference of Building Officials,1997.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心