强工频干扰波的提取与消除方法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对强工频干扰问题 ,提出了在时间域内提取单频干扰的共轭梯度方法。采用串联方法消除工频干扰及其谐波 ,即逐个提取单频干扰波 ,然后从地震记录中减去该单频干扰波 ,最终达到消除工业电干扰的目的。理论记录试算和实际资料处理结果表明 ,即使是对于常规滤波方法难以消除的极强的工频干扰 ,该方法仍然获得了较好的效果。在工频干扰较强的情况下 ,陷波滤波方法将导致信号起跳时刻模糊 ,而本方法则不存在这样的问题。此法适用于提取和消除各种频率的干扰波
A new method is advanced to extract and remove strong power interference. This method adopts conjugate gradient method to recover single-frequency interference, and removes power interference in series, that is, each single-frequency interference is extracted firstly, then, is subtracted from the seismic record. Theoretical and real data results prove the feasibility of the method in suppression of strong power interference which is hard to be suppressed by conventional filtering methods. For not very strong power interference, filtering method will cause first break to be blurry, whereas this method can work perfectly. This method is applicable to extraction and removal of any frequency interference.
引文
1 杜丽冰.改善ECG中50Hz干扰的抑制性能[J].环境技术,1999(1):8~10
    2 梅铁民,虞闯,余卫国.心电信号中50Hz干扰的消除[J].沈阳工业学院学报,2000,19(2):25~28
    3 张建平,李庆武,张耀举.瞬变电磁仪中消除50Hz干扰的自适应滤波方法[J].测控技术,1999,18(6):67~68
    4 吴小培,詹长安,周荷琴.采用独立分量分析方法消除信号中的工频干扰[J].中国科学技术大学学报,2000,30(6):671~676
    5 陈亚光,杨仲乐,陈心浩.诱发脑电信号中工频噪声及其谐波成分的去除[J].中南民族学院学报,1997,16(1):14~17
    6 高少武,周兴元,蔡加铭.时间域单频干扰波的压制[J].石油地球物理勘探,2001,36(1):51~55
    7 陈宝林.最优化理论与算法[M].北京:清华大学出版社,1994.334~391

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心