三维折射初至延迟时分解静校正
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
利用地震资料得到的表层折射初至进行静校正是目前生产中的主要静校正方法。由于此类方法较多,应用条件受到不同的限制。基于延迟时分解的静校正技术能充分利用所有地震道的折射初至,反演出近地表结构,其原理简单,不受观测系统类型限制,且计算速度较快,在近地表不太复杂的地区使用效果较好。
The refraction static corrections using refraction first-break time in seismic data becomes a main method in current seismic data processing.Because of the diversity of this method and each method restricted by different conditions,it’s necessary to find a low-cost,efficacious and common method.The static correction based on the decomposition of delay time can sufficiently utilize the refraction first-break time of all the traces.This method has simple principle,faster computing speed and not be restricted by layout,so it can achieve very good results in the area where is not too complicated and near surface.
引文
[1]Marsden D.Static Corrections-review(partⅠ)[J].The Lead-ing EAGE,1993,12(1):43-49.
    [2]Marsden D.Static Corrections-review(partⅡ)[J].The Lead-ing EAGE,1993,12(2):115-120.
    [3]麦克考克斯.反射地震勘探静校正技术[M].李培明,柯本喜译.北京:石油工业出版社,2004:319-331.
    [4]张建中,徐峰,戴云.共中心点域浅层折射波解释方法及应用实例[J].石油地球物理勘探,2001,36(4):459-465.
    [5]宁俊瑞,王顺国,樊佳芳,等.基于对比折射法的三维静校正技术及应用[J].石油物探,2006,45(3):277-284.
    [6]王彦春,余钦范,段云卿.三维折射波静校正[J].石油地球物理勘探,2000,35(1):13-19.
    [7]Taner M T,Wagner D,Baysal E,Lu L.A Unified Method for2D and 3D Refraction Statics[J].Geophysics,1998,63(1):260-274.
    [8]范华,徐光民,贺涌,等.三维初至折射静校正算法分析[J].石油地球物理勘探,2003,38(5):475-481.
    [9]王克斌,赵灵芝,张旭民.折射静校正在苏里格气田三维处理中的应用[J].石油物探,2003,42(2):248-251.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心