平衡剖面技术在前陆冲断带构造恢复中的应用——以准噶尔盆地西北缘为例
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
平衡剖面技术是一种遵循几何守恒原则而反演地质构造演化过程的剖面、亦是恢复重建地质演化历史活动及过程的一种方法,同时也是构造演化定量分析的有效手段。准噶尔盆地西北缘是典型的前陆冲断带,由于其地质条件复杂、地震波速横向变化大等原因,故对该区构造演化及动力学机制研究与油气地质条件的分析一直不能深入进行,因而严重制约了油气勘探进程。针对以上症结所在,从技术层面提出了更好的利用平衡剖面技术进行构造演化恢复的方法,进而为深刻认识该区构造发育史、分析油气运移及聚集规律等提供了依据。通过平衡剖面恢复的结果表明,研究区经历了挤压—伸展—挤压三期构造运动,并由此构成了一个完整的构造旋回。其中,晚二叠世存在一个小幅度的快速挤压期,而三叠纪为整个构造演化中最强烈的构造挤压时期,其对该区构造演化及构造格架形成与油气运聚成藏等均具重要影响和控制作用。
The balanced cross-section is an effective tool for quantitative restoration of structural evolution under the guidance of a constant geometry.The northwestern margin of the Junggar Basin is a typical foreland thrust belt.Due to the complexity of geological conditions and the horizontal variation of seismic wave velocity,the study of tectonic evolution and its dynamic mechanism is not deep enough in the basin that constraints effective oil exploration.In order to obtain the reliable results,adequate methods should be adopted on the basis of actual geological conditions.For the reliable restoration of structural evolution by balanced cross-section in foreland thrust belt in northwestern China,4 critical steps are suggested from technical point of view in this paper: Firstly it is necessary to select a suitable seismic line;Secondly,use variable velocity parameters in time-depth conversion to have reliable geologic profiles;Thirdly,adopt the flexural-slip mechanism for middle and upper strata,and then apply the vertical mechanism to deeper strata;Finally,decompact the strata by segment where the lithologic characters vary intensively in the horizon to decrease the decompaction errors.The northwestern margin of the Junggar Basin in Northwest China,which is a typical foreland thrust belt,is discussed in this paper as an example.The result suggests that the study area experienced a complete tectonic cycle consisting of three tectonic movements of compression-extension-compression.There is a rapid low amplitude compression stage in late Permian,and the strongest compression of tectonic evolution in Triassic.All the above has important impact on the formation of structural framework and the migration and accumulation of hydrocarbons.
引文
[1]Dahlstrom C D A.Balanced cross sections[J].CanadianJournal of Earth Science,1969,6:743-757.
    [2]陈伟,卢华复,施央申,等.一种断层预测方法及其在正演平衡剖面制作中的辅助作用[J].南京大学学报,1993,29(3):477-484.
    [3]蒋录全,刘光炎.平衡剖面技术综述[J].南方油气地质,1995,1(3):39-46.
    [4]陈竹新,贾东,张惬,等.龙门山前陆褶皱冲断带的平衡剖面分析[J].地质学报,2005,79(1):38-45.
    [5]王亚东,方小敏,张涛,等.平衡剖面反映的柴西新生代变形对青藏高原隆升的响应[J].兰州大学学报(自然科学版),2009,45(6):28-35.
    [6]颜丹平,田崇鲁,孟令波,等.伸展构造盆地的平衡剖面及其构造意义——以松辽盆地南部为例[J].地球科学,2003,28(3):275-280.
    [7]苏惠,曲丽萍,李桂霞,等.东濮凹陷平衡剖面与构造演化研究[J].石油地球物理勘探,2000,35(4):469-478.
    [8]王运所,刘亚洲,张孝义,等.平衡剖面的制作流程及其地质意义[J].长安大学学报(地球科学版),2003,25(1):28-32.
    [9]汤济广,梅廉夫,沈传波,等.平衡剖面技术在盆地构造分析中的应用进展及存在的问题[J].油气地质与采收率,2006,13(6):19-22.
    [10]常玉琴.平衡剖面技术在圈闭研究中的应用[J].吐哈油气,2005,10(2):115-118.
    [11]张向鹏,杨晓薇.平衡剖面技术的研究现状及进展[J].煤田地质与勘探,2007,35(2):78-80.
    [12]张进铎.平衡剖面技术在国内外油气勘探中的最新应用[J].地球物理学进展,2007,22(6):1856-1861.
    [13]王勇,熊伟,崔营滨.东营凹陷陡坡带构造演化物理模拟[J].断块油气田,2011,18(4):449-452.
    [14]马宝军,漆家福,杨桥.沾车凹陷新生代盆地基底构造演化的物理模拟[J].西安石油大学学报(自然科学版),2005,20(3):15-18.
    [15]Sclater J,Christie P.Continental stretching:an explana-tion of the post-Mid-Cretaceous subsidence of the centralNorth Sea basin[J].Journal of Geophysical Research,1980,85:3 711-3 739.
    [16]周建勋.同沉积挤压盆地构造演化恢复的平衡剖面方法及其应用[J].地球学报,2005,26(2):151-156.
    [17]何登发,尹成,杜社宽,等.前陆冲断带构造分段特征——以准噶尔盆地西北缘断裂构造带为例[J].地学前缘,2004,11(3):91-101.
    [18]孟家峰,郭召杰,方世虎.准噶尔盆地西北缘葱段构造新解[J].地学前缘,2009,16(3):171-180.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心