平衡剖面技术原理及其研究进展
|
摘要
平衡剖面技术是通过几何学原则,在垂直构造走向的剖面上将变形构造全部复原成合理的未变形状态的一种模拟技术。它可以对地层构造演化进行定量、半定量的分析解释,是构造演化定量分析的重要手段,在油气勘探、盆地模拟等领域得到广泛应用。本文介绍了平衡剖面技术的发展历程、基本概念、原理及模拟过程的限制条件;论述了平衡剖面校正的方法;着重阐述了平衡剖面正演和反演制作方法。提出了平衡剖面技术的不足:平衡剖面技术测出的缩短量和缩短率精度有待提高;三维模拟的制作过程比较繁琐;应将地层岩性展布考虑进去,并纳入沉积相;地层厚度的精准度对平衡剖面技术的准确性影响很大。随着对平衡剖面技术研究的深入以及计算机技术的发展,平衡剖面技术在构造变形剧烈,地震资料品质较差的地区将得到更广泛的应用。
The balanced section technique is a simulation technique about restoring deformation structure into original undeformation condition on the vertical structure,based on geometric conservation principle.It can quantitatively and semiquantitatively analyze the formation tectonic evolution,and access to a wide range of applications in the field of oil-gas exploration and basin modeling.The developing process,basic concept,principle and limiting conditions in simulating process of balanced section technique were introduced.The correcting methods of balanced section were discussed.The making methods of forward modeling and inverse modeling were emphatically elaborated.The insufficiency of the balanced section technique were presented:(1) The accuracy of shortening amount and shortening rate measured by the balanced section technique needs to be improved;(2) The production process of three-dimensional simulation is relatively complicated;(3) The spreading regularity of formation lithology sedimentary and facies should be taken into account;(4) The accuracy of the balanced section technique is largely influenced by the precision of the formation thickness.With deeper study on balanced section technique and the development of the computer technology,the balanced section technique is regarded as an effective method in particular area with violent structural deformation and poor seismic quality.
The balanced section technique is a simulation technique about restoring deformation structure into original undeformation condition on the vertical structure,based on geometric conservation principle.It can quantitatively and semiquantitatively analyze the formation tectonic evolution,and access to a wide range of applications in the field of oil-gas exploration and basin modeling.The developing process,basic concept,principle and limiting conditions in simulating process of balanced section technique were introduced.The correcting methods of balanced section were discussed.The making methods of forward modeling and inverse modeling were emphatically elaborated.The insufficiency of the balanced section technique were presented:(1) The accuracy of shortening amount and shortening rate measured by the balanced section technique needs to be improved;(2) The production process of three-dimensional simulation is relatively complicated;(3) The spreading regularity of formation lithology sedimentary and facies should be taken into account;(4) The accuracy of the balanced section technique is largely influenced by the precision of the formation thickness.With deeper study on balanced section technique and the development of the computer technology,the balanced section technique is regarded as an effective method in particular area with violent structural deformation and poor seismic quality.
引文
[1]张向鹏.地震拟地质平衡剖面技术的应用[J].安徽理工大学学报:自然科学版,2007,27(S):64-66.Zhang Xiangpeng.Journal of Anhui University of Science and Technolo-gy:Natural Science Edition,2007,27(S):64-66.
[2]张向鹏,杨晓薇.平衡剖面技术的研究现状及进展[J].煤田地质与勘探,2007,35(2):78-80.Zhang Xiangpeng,Yang Xiaowei.Coal Geology&Exploration,2007,35(2):78-80.
[3]张进铎.平衡剖面技术在国内外油气勘探中的最新应用[J].地球物理学,2007,22(6):1856-1861.Zhang Jinduo.Progress in Geophysics,2007,22(6):1856-1861.
[4]刘光炎,蒋录全.平衡剖面技术与地震资料解释[J].石油地球物理勘探,1995,30(5):833-845.Liu Guangyan,Jiang Luquan.Oil Geophysical Prospecting,1995,30(5):833-845.
[5]Corredor F O.Three-dimensional geometry and kinematics of the western thrust front of the eastern Cordillera,Columbia[J].AAPG SEPM,1996,5:29-30.
[6]任朝波,漆立新,丁文龙,等.平衡剖面技术在塔里木盆地阿克库勒凸起构造演化分析中的应用[J].新疆石油天然气,2008,2(4):5-10.Ren Chaobo,Qi Lixin,Ding Wenlong,et al.Xinjing Oil&Gas,2008,2(4):5-10.
[7]Dahlstrom C D A.Balanced cross sections[J].Canadian Journal of Earth Science,1969,6(4):743-757.
[8]Hossack J R.The use of balanced cross-sections in the calculation of orogenic contraction:A review[J].Journal of the Geological Society,1979,136(6):705-711.
[9]Elliott D.The construction of balanced cross-section[J].Journal of Structural Geology,1983,5(2):101-136.
[10]Suppe J.Geometry and kinematics of fault-bend folding[J].American Journal of Science,1983,283(7):684-721.
[11]Suppe J.Principles of structural geology[M].Englewood Cliffs,NJ:Prentice-Hall,1985.
[12]宋鸿林.平衡剖面及其地质意义[J].地质科技情报,1985,4(1):18-28.Song Honglin.Geological Science and Technology Information,1985,4(1):18-28.
[13]Davison I.Listric normal fault profiles:Calculation using bed length balance and fault displacement[J].Journal of Structural Geology,1986,8(2):209-211.
[14]Suppe J,Medwedeff D A.Geometry and kinematics of fault-propagation folding[J].Eclogae Geologicae Helvetiae,1990,83:409-454.
[15]刘学峰,孟令奎.松辽盆地北部深层构造的平衡剖面研究[J].西安石油大学学报,2004,19(5):11-17.Liu Xuefeng,Meng Lingkui.Journal of Xian Shiyou University:Natural Science Edition,2004,19(5):11-17.
[16]杨济广,梅廉夫,沈传波,等.平衡剖面技术在盆地构造分析中的应用进展及存在的问题[J].油气地质与采收率,2006,13(6):19-23.Yang Jiguang,Mei Lianfu,Shen Chuanbo,et al.Geology and Recivery Efficiency,2006,13(6):19-23.
[17]苏惠,曲丽萍,李桂霞,等.东濮凹陷平衡剖面与构造演化研究[J].石油地球物理勘探,2000,35(4):469-478.Su Hui,Qu Liping,Li Guixia,et al.Oil Geophysical Prospecting,2000,35(4):469-478.
[18]颜丹平,田崇鲁,孟令波,等.伸展构造盆地的平衡剖面及其构造意义——以松辽盆地南部为例[J].地球科学:中国地质大学学报,2003,28(3):275-280.Yan Danping,Tian Chonglu,Meng Lingbo et al.Earth Science:Journal of China University of Geosciences,2003,28(3):275-280.
[19]肖安成.平衡剖面的正演模拟方法[J].江汉石油学院学报,1994,16(1):1-6.Xiao Ancheng.Journal of Jiang Han Petroleum Institute,1994,16(1):1-6.
[20]梁慧社,张建珍,夏义平.平衡剖面技术及其在油气勘探中的应用[M].北京:地震出版社,2003.Liang Huishe,Zhang Jianzhen,Xia Yiping.The balanced cross technol-ogy and its application of petroleum exploration[M].Beijing:Seismologi-cal Press,2003.
[21]李乐,王静.平衡剖面技术在构造复杂地区地震资料解释中的应用[J].钻采工艺,2010,33(S):76-78,82.Li Le,Wang Jing.Drilling&Production Technology,2010,33(S):76-78,82.
[22]李伟,吴智平,侯旭波,等.平衡剖面技术在临清坳陷东部盆地分析中的应用[J].油气地质与采收率,2010,17(2):35-41.Li Wei,Wu Zhiping,Hou Xubo,et al.Petroleum Geology and Recovery Efficiency,2010,17(2):35-41.
[23]梁顺军.平衡观点与地震观点的解释效果分析与评价[J].石油物探,2002,41(3):377-384.Liang Shunjun.Geophysical Prospecting For Petroleum,2002,41(3):377-384.
[24]Butler R W H.Thrust sequences[J].Journal of the Geological Society,1987,143(6):857-634.
[25]Elliott D.The construction of balanced cross-sections[J].Journal of Structural Geology,1983,5(2):101-103.
[26]Ramsay J G.Tectonics of the Helvetic Nappes[M].McClay K R,Price N J.Thrust and Nappe Tectonics.Oxford:Blackwell Scientific Publica-tions,1981,9:293-309.
[27]陈伟,卢华复,施央申.平衡剖面计算机模拟及其应用[M].北京:科学出版社,1993.Chen Wei,Lu Huafu,Shi Yangshen.Balanced cross-section computer simulation and its application[M].Beijing:Science Press,1993.
[28]Gibbs A D.Balanced cross section construction from seismic sections in areas of extensional tectonics[J].Journal of Structural Geology,1983,5(2):153-160.
[29]Gehrels G E,Yin A,Wang X F.Detrital-Zircon geochronology of the northeastern Tibetan Plateau[J].Geological Society of America Bulletin,2003,115(7):881-896.
[30]Williams G,Vann I.The geometry of listric normal faults and deforma-tion in their hangingwalls[J].Journal of Structural Geology,1987,9(7):789-795.
[31]胡德昭,徐鸣洁,黄钟谨.安徽无为盆地平衡地质剖面研究[J].高校地质学报,1996,2(4):431-436.Hu Dezhao,Xu Mingjie,Huang Zhongjin.Geological Journal of China Universities,1996,2(4):431-436.
[32]何为刚.平衡剖面技术计算机模拟[D].成都:成都理工大学,2003.He Weigang.Computer simulation of the balanced cross section[D].Chengdu:Chengdu University of Technology,2003.
[33]周建勋.同沉积挤压盆地构造演化回复的平衡剖面方法及应用[J].地球学报,2005,26(2):151-156.Zhou Jianxun.Acta Geoscientica Sinica,2005,26(2):151-156.
[34]封从军,鲍志东,孙萌思,等.地震解释中构造及其陷阱的识别方法[J].科技导报,2010,28(13):62-67.Feng Congjun,Bao Zhidong,Sun Mengsi,et al.Science&Technology Review,2010,28(13):62-67.
[35]杨斌谊.焉耆盆地中新生代构造演化与油气聚集[D].西安:西北大学,2004.Yang Binyi.Tectonic evolution and petroleum accumulation in mesozoic and cenozoic Yanqi Basin[D].Xi'an:Northwest University,2004.
[36]李永林.新疆焉耆盆地构造演化与含油气系统研究[D].北京:中国地质大学(北京),2002.Li Yonglin.Research on structural evolution and petroleum system in Yanqi Basin,Xinjiang[D].Beijing:China University of Geosciences(Beijing),2002.
[37]陈拥锋,张渝昌,江兴歌.构造趋势法计算剥蚀量的计算机实现[J].江苏地质,2007,31(4):344-347..Chen Yongfeng,Zhang Yuchang,Jiang Xingge.Jiangsu Geology,2007,31(4):344-347.
[38]郝慧,漆家福,周建勋,等.塔木查格盆地南贝尔凹陷构造特征[J].科技导报,2011,29(9):31-35.Hao Hui,Qi Jiafu,Zhou Jianxun,et al.Science&Technology Review,2011,29(9):31-35.
[39]Davison I.Listric normal fault profiles:Calculation using bed length balance and fault displacement[J].Journal of Structural Geology,1986,8(2):209-210.
[40]王运所,刘亚洲,张孝义,等.平衡剖面的制作流程及其地质意义[J].长安大学学报:地球科学版,2003,25(1):28-33.Wang Yunsuo,Liu Yazhou,Zhang Xiaoyi,et al.Journal of Changan U-niversity:Earth Science Edition,2003,25(1):28-33.
[41]何明喜.盆地走滑变形研究与古物构造分析[M].西安:西北大学出版社,1993.He Mingxi.Basin strike-slip deformation of structural analysis and an-tiquities[M].Xi'an:Northwest University Press,1993.
[42]胡斌,齐丽军,张辉,等.平衡剖面在焉耆盆地构造演化分析中的应用[J].西南石油学院学报,2006,28(4):18-22.Hu Bin,Qi Lijun,Zhang Hui,et al.Journal of Southwest Petroleum In-stitute,2006,28(4):18-22.
[43]梅廉夫,刘昭茜,杨济广,等.湘鄂西_川东中生代陆内递进扩展变形——来自裂变径迹和平衡剖面的证据[J].地球科学:中国地质大学学报,2010,35(2):162-174.Mei Lianfu,Liu Zhaoqian,Yang Jiguang,et al.Eaeth Science:Journal of China University of Geosciences,2010,35(2):162-174.
[44]夏在连,史海英,王馨.下扬子盆地黄桥地区构造演化[J].内蒙古石油化工,2010(12):137-139.Xia Zailian,Shi Haiying,Wang Xin.Inner Mongulia Petrochemical In-dustry,2010(12):137-139.
[45]张锐,郭召杰,张志诚,等.天山北麓晚新生代独山子——安集海褶皱冲断带构造分析及其对河流改道的影响[J].新疆地质,2005,23(3):215-219.Zhang Rui,Guo Zhaojie,Zhang Zhicheng,et al.Xinjiang Geology,2005,23(3):215-219.
[46]郑民,孟自芳,罗慎超,等.塔里木盆地鸟山构造带构造演化时序及油气勘探意义[J].地质学报,2009,83(1):16-24.Zheng Min,Meng Zifang,Luo Shenchao,et al.Acta Geologica Sinica,2009,83(1):16-24.
[47]许怀智,张岳桥,刘兴晓,等.塔东南隆起沉积——构造特征及其演化历史[J].中国地质,2009,36(5):1030-1045.Xu Huaizhi,Zhang Yueqiao,Liu Xingxiao,et al.Geoloy in China,2009,36(5):1030-1045.
[48]施泽进,彭大钧,施央申,等.苏北溱潼凹陷的拉张量研究及构造运动强度分析[J].大地构造与成矿学,1994,18(1):43-52.Shi Zejin,Peng Dajun,Shi Yangshen,et al.Geotectonica et Mctalloge-nia,1994,18(1):43-52.
[49]陈娟,张庆龙,王良书,等.松辽盆地长岭断陷盆地断陷期构造转换及油气地质意义[J].地质学报,2008,82(8):1027-1035.Chen Juan,Zhang Qinglong,Wang Liangshu,et al.Acta Geologica Sini-ca,2008,82(8):1027-1035.
[50]左代容.文明寨油田复杂断块区构造演化与油气成藏[J].断块油气田,2009,16(4):30-33.Zuo Dairong.Fault-Block Oil&Field,2009,16(4):30-33.
[51]程光锁.准噶尔盆地南缘中段构造的平衡剖面研究[J].地球学报,2008,29(5):563-570.Cheng Guangsuo.Acta Geoscientica Sinica,2008,29(5):563-570.
[52]Cooper M A,Garton M R,Hossack J R.The origin of the Basse Nor-mandie duplex,Boulonnais,France[J].Journal of Structural Geology,1983,5(2):139-152.
[53]Cooper M A.The calculation of bulk strain in oblique and inclined bal-anced sections[J].Journal of Structural Geology,1983,5(2):161-165.
[54]Cooper M A,Trayner P M.Thrust-surface geology:Implications for thrust-blet evolution and section-balancing techniques[J].Journal of Structural Geology,1986,8(3-4):305-312.
[55]McQuilin R.An introduction to seismic interpretation[M].Fan Weicui,Hu Quanshan,trans.Beijing:Petroleum Industry Press,1985.
[56]刘瑞红,陈海云,付建伟.惠民凹陷盘河构造深层油气成藏条件研究[J].科技导报,2010,28(4):93-96.Liu Ruihong,Chen Haiyun,Fu Jianwei.Science&Technology Review,2010,28(4):93-96.
[2]张向鹏,杨晓薇.平衡剖面技术的研究现状及进展[J].煤田地质与勘探,2007,35(2):78-80.Zhang Xiangpeng,Yang Xiaowei.Coal Geology&Exploration,2007,35(2):78-80.
[3]张进铎.平衡剖面技术在国内外油气勘探中的最新应用[J].地球物理学,2007,22(6):1856-1861.Zhang Jinduo.Progress in Geophysics,2007,22(6):1856-1861.
[4]刘光炎,蒋录全.平衡剖面技术与地震资料解释[J].石油地球物理勘探,1995,30(5):833-845.Liu Guangyan,Jiang Luquan.Oil Geophysical Prospecting,1995,30(5):833-845.
[5]Corredor F O.Three-dimensional geometry and kinematics of the western thrust front of the eastern Cordillera,Columbia[J].AAPG SEPM,1996,5:29-30.
[6]任朝波,漆立新,丁文龙,等.平衡剖面技术在塔里木盆地阿克库勒凸起构造演化分析中的应用[J].新疆石油天然气,2008,2(4):5-10.Ren Chaobo,Qi Lixin,Ding Wenlong,et al.Xinjing Oil&Gas,2008,2(4):5-10.
[7]Dahlstrom C D A.Balanced cross sections[J].Canadian Journal of Earth Science,1969,6(4):743-757.
[8]Hossack J R.The use of balanced cross-sections in the calculation of orogenic contraction:A review[J].Journal of the Geological Society,1979,136(6):705-711.
[9]Elliott D.The construction of balanced cross-section[J].Journal of Structural Geology,1983,5(2):101-136.
[10]Suppe J.Geometry and kinematics of fault-bend folding[J].American Journal of Science,1983,283(7):684-721.
[11]Suppe J.Principles of structural geology[M].Englewood Cliffs,NJ:Prentice-Hall,1985.
[12]宋鸿林.平衡剖面及其地质意义[J].地质科技情报,1985,4(1):18-28.Song Honglin.Geological Science and Technology Information,1985,4(1):18-28.
[13]Davison I.Listric normal fault profiles:Calculation using bed length balance and fault displacement[J].Journal of Structural Geology,1986,8(2):209-211.
[14]Suppe J,Medwedeff D A.Geometry and kinematics of fault-propagation folding[J].Eclogae Geologicae Helvetiae,1990,83:409-454.
[15]刘学峰,孟令奎.松辽盆地北部深层构造的平衡剖面研究[J].西安石油大学学报,2004,19(5):11-17.Liu Xuefeng,Meng Lingkui.Journal of Xian Shiyou University:Natural Science Edition,2004,19(5):11-17.
[16]杨济广,梅廉夫,沈传波,等.平衡剖面技术在盆地构造分析中的应用进展及存在的问题[J].油气地质与采收率,2006,13(6):19-23.Yang Jiguang,Mei Lianfu,Shen Chuanbo,et al.Geology and Recivery Efficiency,2006,13(6):19-23.
[17]苏惠,曲丽萍,李桂霞,等.东濮凹陷平衡剖面与构造演化研究[J].石油地球物理勘探,2000,35(4):469-478.Su Hui,Qu Liping,Li Guixia,et al.Oil Geophysical Prospecting,2000,35(4):469-478.
[18]颜丹平,田崇鲁,孟令波,等.伸展构造盆地的平衡剖面及其构造意义——以松辽盆地南部为例[J].地球科学:中国地质大学学报,2003,28(3):275-280.Yan Danping,Tian Chonglu,Meng Lingbo et al.Earth Science:Journal of China University of Geosciences,2003,28(3):275-280.
[19]肖安成.平衡剖面的正演模拟方法[J].江汉石油学院学报,1994,16(1):1-6.Xiao Ancheng.Journal of Jiang Han Petroleum Institute,1994,16(1):1-6.
[20]梁慧社,张建珍,夏义平.平衡剖面技术及其在油气勘探中的应用[M].北京:地震出版社,2003.Liang Huishe,Zhang Jianzhen,Xia Yiping.The balanced cross technol-ogy and its application of petroleum exploration[M].Beijing:Seismologi-cal Press,2003.
[21]李乐,王静.平衡剖面技术在构造复杂地区地震资料解释中的应用[J].钻采工艺,2010,33(S):76-78,82.Li Le,Wang Jing.Drilling&Production Technology,2010,33(S):76-78,82.
[22]李伟,吴智平,侯旭波,等.平衡剖面技术在临清坳陷东部盆地分析中的应用[J].油气地质与采收率,2010,17(2):35-41.Li Wei,Wu Zhiping,Hou Xubo,et al.Petroleum Geology and Recovery Efficiency,2010,17(2):35-41.
[23]梁顺军.平衡观点与地震观点的解释效果分析与评价[J].石油物探,2002,41(3):377-384.Liang Shunjun.Geophysical Prospecting For Petroleum,2002,41(3):377-384.
[24]Butler R W H.Thrust sequences[J].Journal of the Geological Society,1987,143(6):857-634.
[25]Elliott D.The construction of balanced cross-sections[J].Journal of Structural Geology,1983,5(2):101-103.
[26]Ramsay J G.Tectonics of the Helvetic Nappes[M].McClay K R,Price N J.Thrust and Nappe Tectonics.Oxford:Blackwell Scientific Publica-tions,1981,9:293-309.
[27]陈伟,卢华复,施央申.平衡剖面计算机模拟及其应用[M].北京:科学出版社,1993.Chen Wei,Lu Huafu,Shi Yangshen.Balanced cross-section computer simulation and its application[M].Beijing:Science Press,1993.
[28]Gibbs A D.Balanced cross section construction from seismic sections in areas of extensional tectonics[J].Journal of Structural Geology,1983,5(2):153-160.
[29]Gehrels G E,Yin A,Wang X F.Detrital-Zircon geochronology of the northeastern Tibetan Plateau[J].Geological Society of America Bulletin,2003,115(7):881-896.
[30]Williams G,Vann I.The geometry of listric normal faults and deforma-tion in their hangingwalls[J].Journal of Structural Geology,1987,9(7):789-795.
[31]胡德昭,徐鸣洁,黄钟谨.安徽无为盆地平衡地质剖面研究[J].高校地质学报,1996,2(4):431-436.Hu Dezhao,Xu Mingjie,Huang Zhongjin.Geological Journal of China Universities,1996,2(4):431-436.
[32]何为刚.平衡剖面技术计算机模拟[D].成都:成都理工大学,2003.He Weigang.Computer simulation of the balanced cross section[D].Chengdu:Chengdu University of Technology,2003.
[33]周建勋.同沉积挤压盆地构造演化回复的平衡剖面方法及应用[J].地球学报,2005,26(2):151-156.Zhou Jianxun.Acta Geoscientica Sinica,2005,26(2):151-156.
[34]封从军,鲍志东,孙萌思,等.地震解释中构造及其陷阱的识别方法[J].科技导报,2010,28(13):62-67.Feng Congjun,Bao Zhidong,Sun Mengsi,et al.Science&Technology Review,2010,28(13):62-67.
[35]杨斌谊.焉耆盆地中新生代构造演化与油气聚集[D].西安:西北大学,2004.Yang Binyi.Tectonic evolution and petroleum accumulation in mesozoic and cenozoic Yanqi Basin[D].Xi'an:Northwest University,2004.
[36]李永林.新疆焉耆盆地构造演化与含油气系统研究[D].北京:中国地质大学(北京),2002.Li Yonglin.Research on structural evolution and petroleum system in Yanqi Basin,Xinjiang[D].Beijing:China University of Geosciences(Beijing),2002.
[37]陈拥锋,张渝昌,江兴歌.构造趋势法计算剥蚀量的计算机实现[J].江苏地质,2007,31(4):344-347..Chen Yongfeng,Zhang Yuchang,Jiang Xingge.Jiangsu Geology,2007,31(4):344-347.
[38]郝慧,漆家福,周建勋,等.塔木查格盆地南贝尔凹陷构造特征[J].科技导报,2011,29(9):31-35.Hao Hui,Qi Jiafu,Zhou Jianxun,et al.Science&Technology Review,2011,29(9):31-35.
[39]Davison I.Listric normal fault profiles:Calculation using bed length balance and fault displacement[J].Journal of Structural Geology,1986,8(2):209-210.
[40]王运所,刘亚洲,张孝义,等.平衡剖面的制作流程及其地质意义[J].长安大学学报:地球科学版,2003,25(1):28-33.Wang Yunsuo,Liu Yazhou,Zhang Xiaoyi,et al.Journal of Changan U-niversity:Earth Science Edition,2003,25(1):28-33.
[41]何明喜.盆地走滑变形研究与古物构造分析[M].西安:西北大学出版社,1993.He Mingxi.Basin strike-slip deformation of structural analysis and an-tiquities[M].Xi'an:Northwest University Press,1993.
[42]胡斌,齐丽军,张辉,等.平衡剖面在焉耆盆地构造演化分析中的应用[J].西南石油学院学报,2006,28(4):18-22.Hu Bin,Qi Lijun,Zhang Hui,et al.Journal of Southwest Petroleum In-stitute,2006,28(4):18-22.
[43]梅廉夫,刘昭茜,杨济广,等.湘鄂西_川东中生代陆内递进扩展变形——来自裂变径迹和平衡剖面的证据[J].地球科学:中国地质大学学报,2010,35(2):162-174.Mei Lianfu,Liu Zhaoqian,Yang Jiguang,et al.Eaeth Science:Journal of China University of Geosciences,2010,35(2):162-174.
[44]夏在连,史海英,王馨.下扬子盆地黄桥地区构造演化[J].内蒙古石油化工,2010(12):137-139.Xia Zailian,Shi Haiying,Wang Xin.Inner Mongulia Petrochemical In-dustry,2010(12):137-139.
[45]张锐,郭召杰,张志诚,等.天山北麓晚新生代独山子——安集海褶皱冲断带构造分析及其对河流改道的影响[J].新疆地质,2005,23(3):215-219.Zhang Rui,Guo Zhaojie,Zhang Zhicheng,et al.Xinjiang Geology,2005,23(3):215-219.
[46]郑民,孟自芳,罗慎超,等.塔里木盆地鸟山构造带构造演化时序及油气勘探意义[J].地质学报,2009,83(1):16-24.Zheng Min,Meng Zifang,Luo Shenchao,et al.Acta Geologica Sinica,2009,83(1):16-24.
[47]许怀智,张岳桥,刘兴晓,等.塔东南隆起沉积——构造特征及其演化历史[J].中国地质,2009,36(5):1030-1045.Xu Huaizhi,Zhang Yueqiao,Liu Xingxiao,et al.Geoloy in China,2009,36(5):1030-1045.
[48]施泽进,彭大钧,施央申,等.苏北溱潼凹陷的拉张量研究及构造运动强度分析[J].大地构造与成矿学,1994,18(1):43-52.Shi Zejin,Peng Dajun,Shi Yangshen,et al.Geotectonica et Mctalloge-nia,1994,18(1):43-52.
[49]陈娟,张庆龙,王良书,等.松辽盆地长岭断陷盆地断陷期构造转换及油气地质意义[J].地质学报,2008,82(8):1027-1035.Chen Juan,Zhang Qinglong,Wang Liangshu,et al.Acta Geologica Sini-ca,2008,82(8):1027-1035.
[50]左代容.文明寨油田复杂断块区构造演化与油气成藏[J].断块油气田,2009,16(4):30-33.Zuo Dairong.Fault-Block Oil&Field,2009,16(4):30-33.
[51]程光锁.准噶尔盆地南缘中段构造的平衡剖面研究[J].地球学报,2008,29(5):563-570.Cheng Guangsuo.Acta Geoscientica Sinica,2008,29(5):563-570.
[52]Cooper M A,Garton M R,Hossack J R.The origin of the Basse Nor-mandie duplex,Boulonnais,France[J].Journal of Structural Geology,1983,5(2):139-152.
[53]Cooper M A.The calculation of bulk strain in oblique and inclined bal-anced sections[J].Journal of Structural Geology,1983,5(2):161-165.
[54]Cooper M A,Trayner P M.Thrust-surface geology:Implications for thrust-blet evolution and section-balancing techniques[J].Journal of Structural Geology,1986,8(3-4):305-312.
[55]McQuilin R.An introduction to seismic interpretation[M].Fan Weicui,Hu Quanshan,trans.Beijing:Petroleum Industry Press,1985.
[56]刘瑞红,陈海云,付建伟.惠民凹陷盘河构造深层油气成藏条件研究[J].科技导报,2010,28(4):93-96.Liu Ruihong,Chen Haiyun,Fu Jianwei.Science&Technology Review,2010,28(4):93-96.
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心