全国测震台站仪器方位角普查校正
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对测震台网台站方位角普查校正实际需要和方位角普查工作技术要求,提出测震台网台站方位标志安装、台站新安装地震计方位测定、已运行台站地震计方位角普查校正的操作方法,以及摆墩与摆坑型场地地震仪输出极性的检测判定方法。
After analyzing the practical needs of azimuth correction and technical requirements of azimuth survey for seismic stations,the method for the installment of orientation signs in seismic stations is proposed in this paper.Then,the method for orientation determination with newly installed seismograph and the operation approach to make correction in azimuth survey with long-term running seismograph is illustrated.Besides,the detection method to determine polarity of the seismograph in a vault or on a pier is also discussed.
引文
龚云,杨志强,石震.GAT磁悬浮陀螺全站仪在矿山测量中的应用[J].测绘科学,2012,37(2);185-187.
    李少睿,董平江,罗治国.测震仪器定向方法探讨[J].地震地磁观测与研究,2012,33(5/6):250-254.
    吕永清,蔡亚先,程骏玲.确定地震计安装方位的相干性分析法[J].大地测量与地球动力学,2007,27(4):124-127.
    石震,杨志强,田永瑞,等.基于高精度基准数据网的陀螺全站仪寻北精度及稳定性评价方法[J].测绘通报,2012,(1):91-94.
    中国地震局.地震及前兆数字观测技术规范[M].北京:地震出版社,2001.
    Niu Fenglin,Li Juan.Component azimuths of the CE array station sestimated from P-wave particle motion[J].Earthquake Science,2011,24(1):3-13.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心