弧形闸门流激振动及智能控制探讨
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
介绍了水工弧形钢闸门流激振动的原因及危害,分析了现在工程上对闸门流激振动采取的工程措施及运行措施的局限性,提出了利用MR阻尼器,采用智能控制的手段来解决弧形闸门流激振动的新思路。并简要介绍了MR智能阻尼器的工作特性、智能模糊控制的工作流程图及智能振动控制的优点。这表明,应用智能控制手段来解决水工弧形闸门的振动是可行的,也是必要的。
After a general review on causes and hazard of the flow、induced vibration of a tainter gate, the limitation of engineering and operating measures taken to control the vibration is analyzed. A new thought of employing intelligent control measures by means of MR damper is presented. The working performances of the MR damper, working flow、chart of fuzzy control and the advantages of intelligent control are introduced. The study results indicate that the adopted control measure to solve the vibration problem of the hydraulic tainter gate is necessary and feasible.
引文
[1] 严根华,阎诗武.水工弧形闸门振动分析及动力安全设计技术研究[J].金属结构,1998,(1):21-33.
    [2] 谭秀娟.部分水电站水工钢闸门和起闭机安全状况分析[J].大坝与安全,2002,(2):49-51.
    [3] 石运深.三峡泄洪深孔弧形工作门结构及水封型式研究[J].中国三峡建设,2002,(11):37-38.
    [4] 吴杰芳,张林让,陈敏中,等.三峡大坝导流底孔闸门流激振动水弹性模型试验研究[J].长江科学院院报,2001,18(5):76-79.
    [5] 张晓平,张林让,吴杰芳.三峡导流底孔弧形闸门泄洪振动与控制研究[J].长江科学院院报,2003,20(1):33-35.
    [6] 吕明云.大坝升船机地震鞭稍效应的MR智能半主动控制研究[D].武汉:武汉理工大学,2002

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心