引文
[1]勾治践,于骏一.变速切削的研究现状[J].吉林工学院学报,1997,18(4):14-17.GOU Zhijian,YU Junyi.The present status of thesuppression of chatter in metal cutting with varyingspindle speed[J].Journal of Jilin Institute of Technology,1997,18(4):14-17.
[2]费仁元,王民.切削颤振在线监控的研究现状及进展[J].中国机械工程,2001,12(9):1 075-1079.FEI Renyuan,WANG Min.Recent development inmachining chatter control and prediction[J].ChinaMechanical Engineering,2001,12(9):1 075-1 079.
[3]翁泽宇,鲁建厦,谢伟东,等.切削颤振控制研究进展[J].浙江工业大学学报,2002,30(4):323-327.WENG Zeyu,LU Jiansha,XIE Weidong,et al.Progressof research on control of cutting chatter[J].Journal ofZhejiang University of Technology,2002,30(4):323-327.
[4]于英华,徐兴强,徐平.切削颤振的在线监测与控制研究现状分析[J].振动与冲击,2007,26(1):130-135.YU Yinghua,XU Xingqiang,XU Ping.A review ofon-line monitoring and control for machine tool chatter[J].Journal of Vibration and Shock,2007,26(1):130-135.
[5]赵婷婷.切削颤振控制技术的研究现状[J].山东理工大学学报,2006,20(3):107-111.ZHAO Tingting.Recent development in cutting chattercontrol[J].Journal of Shandong University ofTechnology,2006,20(3):107-111.
[6]李彬,邓建新,张松.高速切削加工稳定性研究的现状和发展趋势[J].制造技术与机床,2008(4):33-36.LI Bin,DENG Jianxin,ZHANG Song.Present situationand trend of high speed cutting stability[J].Manufacturing Technology&Machine Tool,2008(4):33-36.
[7]DELIO T,SMITH S,TLUSTY J,et al.Stiffness,stability,and loss of process damping in high speedmachining[C]//American Society of MechanicalEngineers,Production Engineering Division,(Publication),ASME,New York,1990:171-191.
[8]NAGANO S,KOIZUMI T,FUJII T,et al.Developmentof a composite boring bar[J].Composite Structures,1997,38(1-4):531-539.
[9]NEW R.Profile boring of deep holes[J].ProductionEngineer,1981,60(4):41-44.
[10]LEE D G,HWANG H Y,KIM J K.Design andmanufacture of a carbon fiber epoxy rotating boring bar[J].Composite Structures,2003,60(1):115-124.
[11]HARANATH S,GANESAN N,RAO B V A.Dynamicanalysis of machine tool structures with applied dampingtreatment[J].International Journal of Machine Tools andManufacture,1987,27(1):43-55.
[12]ANDERSON C S,SEMERCIGIL S E,TURAN O F.Apassive adaptor to enhance chatter stability for end mills[J].International Journal of Machine Tools andManufacture,2007,47(11):1 777-1 785.
[13]RIVIN E I,KANG H.Enhancement of dynamic stabilityof cantilever tooling structures[J].International Journal ofMachine Tools and Manufacture,1992,32(4):539-561.
[14]SIMS N D.Vibration absorbers for chatter suppression:Anew analytical tuning methodology[J].Journal of Soundand Vibration,2007,301(3-5):592-607.
[15]DEN HARTOG J P.Mechanical vibrations[M]4th ed.New York:McGraw-Hill,1956.
[16]HAHN R S.Design of Lanchester damper for eliminationof metal-cutting chatter[J].Trans.ASME,1951,73:331-336.
[17]RIEHLE P J,BROWN D.Machine tool modificationswith tuned dampers[J].S.V.Sound and Vibration,1984,18(1):34-39.
[18]EDHI E,HOSHI T.Stabilization of high frequencychatter vibration in fine boring by friction damper[J].Precision Engineering,2001,25(3):224-234.
[19]KIM K J,HA J Y.Suppression of machine tool chatterusing a viscoelastic dynamic damper[J].Journal ofEngineering for Industry,Transactions ASME,1987,109(1):58-65.
[20]KIM N H,WON D,ZIEGERT J C.Numerical analysisand parameter study of a mechanical damper for use inlong slender end mills[J].International Journal ofMachine Tools and Manufacture,2006,46(5):500-507.
[21]EMA S,MARUI E.Suppression of chatter vibration ofboring tools using impact dampers[J].InternationalJournal of Machine Tools and Manufacture,2000,40(8):1 141-1 156.
[22]AIBA T,MURATA R,HENMI N,et al.An investigationon variable-attractive-force impact damper and appli-cation for controlling cutting vibration in millingprocess[J].Journal of the Japan Society of PrecisionEngineering,1995,61(1):75-79.
[23]SIMS N D,AMARASINGHE A,RIDGWAY K.Particledampers for workpiece chatter mitigation[C]//2005ASME International Mechanical Engineering Congressand Exposition,New Orleans,LA,USA.New York,USA:ASME,2005:825-832.
[24]COMSTOCK T R,TSE F S,LEMON J R.Application ofcontrolled mechanical impedance for reducing machinetool vibration[J].Journal of Engineering for Industry,1969,91(4):1 057-1 062.
[25]NACHTIGAL C.Design of a force feedback chattercontrol system[J].Transactions of the ASME.Series G,Journal of Dynamic Systems,Measurement and Control,1972,94(1):5-10.
[26]TANAKA N,MIYASHITA M,SUZUKI N,et al.On thesuppression of self-excited vibration by servo damper[J].Bulletin of the JSME,1980,23(176):265-272.
[27]GLASER D J,NACHTIGAL C L.Development of ahydraulic chambered,actively controlled boring bar[J].Journal of Engineering for Industry,Transactions of theASME,1979,101(3):362-368.
[28]NACHTIGAL C.A comparative analysis of alternativeactive chatter control schemes[C]//11th Joint AutomaticControl Conference of the American Automatic ControlCouncil,Atlanta,GA,USA.New York,USA:ASME,1970:141-147.
[29]TEWANI S G,SWITZER T C,WALCOTT B L,et al.Active control of machine tool chatter for a boring bar:Experimental result[C]//American Society ofMechanical Engineers,Design Engineering Division(Publication),Albuquerque,NM,USA.New York,USA:ASME,1993:103-115.
[30]CHOUDHURY S K,SHARATH M S.On-line control ofmachine tool vibration during turning operation[J].Journalof Materials Processing Technology,1995,47(3-4):251-259.
[31]欧进萍,隋莉莉.结构振动控制的半主动磁流变质量驱动器(MR-AMD)[J].地震工程与工程振动,2002(2):108-115.OU Jinping,SUI Lili.Structural vibration control ofsemi-active MR-AMD[J].Earthquake Engineering andEngineering Vibration,2002(2):108-115.
[32]SEGALMAN D,REDMOND J.Chatter suppressionthrough variable impedance and smart fluids[C]//Proceedings of SPIE-The International Society forOptical Engineering,San Diego,CA,USA.Bellingham,WA 98227-0010,United States,1996:353-363.
[33]王民,费仁元.切削系统可变刚度结构及其颤振控制方法的研究[J].机械工程学报,2002,38(增刊):219-222.WANG Min,FEI Renyuan.Research of variable-stiffnessstructure and varying stiffness method on chattercontrol[J].Chinese Journal of Mechanical Engineering,2002,38(Suppl.):219-222.
[34]王茂华,于骏一,张永亮.电流变技术在机床颤振控制中应用的研究[J].机械工程学报,2000,36(11):94-97.WANG Maohua,YU Junyi,ZHANG Yongliang.Study onthe application of electro-rheological technology tomachine chatter control[J].Chinese Journal ofMechanical Engineering,2000,36(11):94-97.
[35]RIVIN E I,XU L.Damping of NiTi shape memory alloysand its application for cutting tools[C]//AmericanSociety of Mechanical Engineers,Noise Control andAcoustics Division(Publication),Chicago,IL,USA.NewYork,USA:ASME,1994:35-41.
[36]JEMIELNIAK K,WIDOTA A.Suppression of self-excited vibration by the spindle speed variation method[J].International Journal of Machine Tool Design&Research,1984,24(3):207-216.
[37]SEXTON J S,MILNE R D,STONE B J.Stabilityanalysis of single-point machining with varying spindlespeed[J].Applied Mathematical Modeling,1977,1(6):310-318.
[38]LIAO Y S,YOUNG Y C.New on-line spindle speedregulation strategy for chatter control[J].InternationalJournal of Machine Tools&Manufacture,1996,36(5):651-660.
[39]PAKDEMIRLI M,ULSOY A G.Perturbation analysis ofspindle speed vibration in machine tool chatter[J].JVC/Journal of Vibration and Control,1997,3(3):261-278.
[40]YILMAZ A,AL-REGIB E,NI J.Machine-tool chattersuppression by multi-level random spindle speedvariation[J].American Society of Mechanical Engineers,Manufacturing Engineering Division,1999,10:897-905.
[41]于骏一,吴博达,孟祥龙.变速切削过程中电机电流的变化特征[J].吉林大学学报,1993(2):15-23.YU Junyi,WU Boda,MENG Xianglong.The varyingcharacteristics of motor current in vari-speed cuttingprocess[J].Journal of Jilin University of Technology,1993(2):15-23.
[42]LIU C R,LIU T M.Automated chatter suppression bytool geometry control[J].Journal of Engineering forIndustry,Transactions ASME,1985,107(2):95-98.
[43]梅志坚,杨叔子,昌松,等.在线调整刀具前角和后角抑制颤振的原理与试验研究[J].武汉理工大学学报,1989(1):53-61.MEI Zhijian,YANG Shuzi,CHANG Song,et al.Theoretical and experimental investigation of chattersuppression by on-line adjusting the rake and clearanceangles of cutting tool[J].Journal of Wuhan University ofTechnology,1989(1):53-61.
[44]YANG F,ZHANG B,YU J.Chatter suppression via anoscillating cutter[J].Journal of Manufacturing Scienceand Engineering,Transactions of the ASME,1999,121(1):54-60.
[45]ALTINTAS Y,ENGIN S,BUDAK E.Analytical stabilityprediction and design of variable pitch cutters[J].Journalof Manufacturing Science and Engineering,Transactionsof the ASME,1999,121(2):173-178.
[46]BUDAK E.An analytical design method for millingcutters with nonconstant pitch to increase stability.Part 2:Application[J].Transactions of the ASME.Journal ofManufacturing Science and Engineering,2003,125(1):35-38.
[47]YANG F,ZHANG B,YU J.Chatter suppression withmultiple time-varying parameters in turning[J].AmericanSociety of Mechanical Engineers,ManufacturingEngineering Division,1999,10:237-242.
[48]MEI C.Active regenerative chatter suppression duringboring manufacturing process[J].Robotics andComputer-integrated Manufacturing,2005,21(2):153-158.
[49]SMITH S,WINFOUGH W R,FROST J.Automaticchatter avoidance in milling using coincident stablespeeds for competing modes[C]//American Society ofMechanical Engineers,Production Engineering Division(Publication),Chicago,IL,USA.New York,USA:ASME,1994:737-747.
[50]TANAKA N.Vibration control by active servodamper[J].J.Mech.Engng.Lab.,1979,33(1):10-12.
[51]欧进萍,关新春.土木工程智能结构体系的研究与发展[J].地震工程与工程振动,1999(2):21-28.OU Jinping,GUAN Xinchun.State-of-the-art of smartstructural systems in civil engineering[J].EarthquakeEngineering and Engineering Vibration,1999(2):21-28.
[52]黄俊,赵宏声,姜德生,等.电流变液和磁流变液及其应用[J].国外建材科技,1996(3):31-33.HUANG Jun,ZHAO Hongsheng,JIANG Desheng,et al.Electrorheological fluids,magnetorheological fluids andtheir applications[J].Science and Technology of OverseasBuilding Materials,1996(3):31-33.
[53]胡海岩,郭大蕾,翁建生.振动半主动控制技术的进展[J].振动、测试与诊断,2001,21(4):235-244.HU Haiyan,GUO Dalei,WENG Jiansheng.Recentadvances in semi-active control of vibration[J].Journalof Vibration,Measurement&Diagnosis,2001,21(4):235-244.
[54]OLGAC N,HOLM-HANSEN B T.New direction inactive vibration absorption:delayed resonator[C]//American Society of Mechanical Engineers,DynamicSystems and Control Division(Publication),NewOrleans,LA,USA.New York,USA:ASME,1993:15-20.
[55]JALILI N,OLGAC N.Multiple delayed resonatorvibration absorbers for multi-degree-of-freedommechanical structures[J].Journal of Sound andVibration,1999,223(4):567-85.
[56]OLGAC N,JALILI N.Modal analysis of flexible beamswith delayed resonator vibration absorber:Theory andexperiments[J].Journal of Sound and Vibration,1998,218(2):307-331.
[57]PAN G,XU H,KWAN C M,et al.Modeling andintelligent chatter control strategies for a lathe machine[J].Control Engineering Practice,1996,4(12):1 647-1 658.
[58]KUBICA E G,ISMAIL F.Active suppression of chatterin peripheral milling.Part II.Application of fuzzy control[J].International Journal of Advanced ManufacturingTechnology,1996,12(4):236-245.
[59]LIANG M,YEAP T,HERMANSYAH A.A fuzzy systemfor chatter suppression in end milling[J].Proceedings ofthe Institution of Mechanical Engineers,Part B:Journalof Engineering Manufacture,2004,218(4):403-417.
[60]MEI Z,YANG S,SHI H,et al.Active chatter suppressionby on-line variation of the rake and clearance angles inturning—principles and experimental investigations[J].International Journal of Machine Tools&Manufacture,1994,34(7):981-990.
[61]ALTINTAS Y,MERDOL S D.Virtual high performancemilling[J].CIRP Annals—Manufacturing Technology,2007,56(1):81-84.