近震参数处理程序的研究与应用
|
摘要
根据安徽省地震局规定使用的表面震源《走时表》 ,按其精度要求 ,把震中距分成三个距离段进行程序设计。在数据处理上 ,对 4 6°以内的数据 ,为保证精度 (0误差 ) ,采用数据检索方式 ;而对 4 6°～ 13 5°之间的数据 ,在保证精度的前提下 ,先进行线性拟合 ,解出一系列关于Δ的函数方程 ,再进行程序编制 ,在实际使用中发挥了较好的作用。
Based on the travell time table of surface focus required by the Seismological Bureau of Anhui Province, the data process pragram of dividing epicentre distance as three range according to accuracy requirement is designed. In order to guarantee accuracy(zero error) the data retrieve manner is used for the data of the epicentre distance less than 4 6°, and first a linear fit is given for one of 4 6～13 5°,the function equations of a series Δ are resolved, then the program is given.
Based on the travell time table of surface focus required by the Seismological Bureau of Anhui Province, the data process pragram of dividing epicentre distance as three range according to accuracy requirement is designed. In order to guarantee accuracy(zero error) the data retrieve manner is used for the data of the epicentre distance less than 4 6°, and first a linear fit is given for one of 4 6～13 5°,the function equations of a series Δ are resolved, then the program is given.
引文
[1] 傅淑芳 ,刘宝诚 ,李文艺 .地震学教程 (下册 ) [M].北京 :地震出版社 ,1980 .34.
[2 ] 林纪曾 .观测数据的数学处理 [M].北京 :地震出版社 ,1981.12 2 - 12 3.
[2 ] 林纪曾 .观测数据的数学处理 [M].北京 :地震出版社 ,1981.12 2 - 12 3.
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心