多钉连接复合材料板钉传载荷的估算
|
摘要
多钉连接的钉传载荷和板孔应力的计算是很重要也很复杂的一个问题。采用各向异性板的复变函数理论和边界配置方法,对连接件进行分区,加以限制条件,对多钉连接的复合材料层合板的钉载和板与螺栓间的接触应力和接触区域进行了计算。板和钉之间的接触应力显著受到连接板的几何尺寸、加载的条件、材料的各向异性、钉与孔之间的间隙、钉的柔度等因素的影响。在计算条件中施加了这些因素的影响。
For joint with multi-fasteners,the prediction of pin- load is an important and complex problem. The composite plate is divied into several regions, and every region contains a bolt hole.Then the approximate boundary conditions and constraints condition are imposed on these regions.The theory of complex variable function for anisotropy plate combined with boundary collocation method is applied to calculation pin - loads and contact region as well as the contact stress on the hole boundary.The contact stress is influenced by some factor,such as the geometry of plate, material anisotropy,fastener flexibility fastener-hole clearance, friction between fastener and laminate, by-pass loading. In the calculation the relation of boundary and the constraint conditions will be considered.
For joint with multi-fasteners,the prediction of pin- load is an important and complex problem. The composite plate is divied into several regions, and every region contains a bolt hole.Then the approximate boundary conditions and constraints condition are imposed on these regions.The theory of complex variable function for anisotropy plate combined with boundary collocation method is applied to calculation pin - loads and contact region as well as the contact stress on the hole boundary.The contact stress is influenced by some factor,such as the geometry of plate, material anisotropy,fastener flexibility fastener-hole clearance, friction between fastener and laminate, by-pass loading. In the calculation the relation of boundary and the constraint conditions will be considered.
引文
1赵美英,阎国良,万小朋,等.复合材料层板钉群连接载荷分配计算方法研究.航空计算技术,2006;36(3):97—101
2高宗战,岳珠峰.带孔复合材料板和螺栓连接复合材料板的有限元计算分析.飞机设计,2003;12(4):24—28
3徐耀玲,张振先.多钉连接复合材料板钉传载荷的计算.燕山大学学报,2005;29(2):178—181
4蒋持平,张行.多钉连接件钉传载荷计算的一个解析方法.航空学报,1994;15(3):310—317
5路可见.平面弹性复变方法.武汉:武汉大学出版社,2005
6Madenci E,Shkarayev S,Sergeev B,et al.Analysis of composite lami-nates with multiple fasteners.Solids and Structures,1998;15(35):1793—1811
7张志民,张开达,杨乃宾.复合材料结构力学.北京,北京航空航天大学出版社,1993
8黎在良,王元汉,李廷芥.断裂力学中的边界数值方法,北京,地震出版社,1996
9Kradinov V,Barut A,Madienci E,et al.Bolted double-la Pcomposite joints under mechanical and thermal loading.Solids and Structures,2001;38(44—45):7801—7837
2高宗战,岳珠峰.带孔复合材料板和螺栓连接复合材料板的有限元计算分析.飞机设计,2003;12(4):24—28
3徐耀玲,张振先.多钉连接复合材料板钉传载荷的计算.燕山大学学报,2005;29(2):178—181
4蒋持平,张行.多钉连接件钉传载荷计算的一个解析方法.航空学报,1994;15(3):310—317
5路可见.平面弹性复变方法.武汉:武汉大学出版社,2005
6Madenci E,Shkarayev S,Sergeev B,et al.Analysis of composite lami-nates with multiple fasteners.Solids and Structures,1998;15(35):1793—1811
7张志民,张开达,杨乃宾.复合材料结构力学.北京,北京航空航天大学出版社,1993
8黎在良,王元汉,李廷芥.断裂力学中的边界数值方法,北京,地震出版社,1996
9Kradinov V,Barut A,Madienci E,et al.Bolted double-la Pcomposite joints under mechanical and thermal loading.Solids and Structures,2001;38(44—45):7801—7837
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心