摘要
为提高短肢剪力墙的抗震性能,在短肢剪力墙沿塑性铰区设置竖缝,通过研究T形和L形局部设缝后对短肢剪力墙的截面等效刚度和侧移影响,结果表明:与未设缝短肢剪力墙进行对比,短肢剪力墙局部设缝后,截面等效刚度降低不会影响使用要求.
In order to improve the quake-proof performance of short-pier shear wall,vertical joints in short-pier shear wall is set along the plastic hinge zone.This paper studies the effect of T-shaped and L-shaped local slotting on the section equivalent stiffness and lateral displacement of the short-pier shear wall.And it shows that after local slotting f the short-pier shear wall,the section equivalent stiffness reduction will not affect the use requirements.
引文
[1]鲁伟,王苏岩.某短肢剪力墙体系的结构性能分析与研究[J].大连理工大学学报,2012(10):15-22.
[2]建设部.JGJ3-2010高层建筑混凝土结构技术规程[S].北京:中国建筑工业出版社,2010.
[3]张守军,李青宁,李锐,等.T形短肢剪力墙弹塑性受力性能优化分析[J].四川建筑科学研究,2009(1):16-20.
[4]黄东升.剪力墙结构分析与设计[M].北京:中国水利水电出版社,2006.
[5]张敏.建筑结构抗震分析与减震控制[M].成都:西南交通大学出版社,2007.
[6]包世华.新编高层建筑结构[M].2版.北京:水利水电出版社,2005.
[7]葛新广,李创第,邹万杰.Maxwell阻尼减震结构的最大非平稳响应[J].广西工学院学报,2012(4):1-7.
[8]张敏.巨型减振框架结构地震反应线性最优半主动控制[J].广西工学院学报,2012,23(2):1-6.