大型卫星整流罩分离冲击载荷分析研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
文章利用工程热力学理论计算了运载火箭整流罩分离用爆炸螺栓的冲击力,同时采用了单只爆炸螺栓冲量测试数据,运用动力学响应分析的直接积分法和NASTRAN有限元程序对Φ3800整流罩在16只爆炸螺栓起爆分离下引起的弹射筒锁紧销动载荷进行了仿真分析。分析与试验结果对比分析表明,数据规律一致性较好,计算结果具有较高的可信度。文章较好地解决了高频冲击响应计算不易收敛和高阶模态精度差的问题。将分析方法应用于其它类似型号的整流罩,也具有较高的精度。
According to thermodynamics theory, the impact force for separation of the launch vehicle fair is calculated. The test data for a single explosive bolt and the method of direct integral dynamic response are combined to simulate the dynamic load on sixteen bolts during separation of a Φ3800 fairing. Consistent results are obtained, which agree very well with the experiment results. It is shown that the methods used in this paper can improve the precision and eliminate the ill-conditioned influences.
引文
[1]NASA-HDBK-7005,Dynamic environment criteria[R],2001:96-110
    [2]姚德源,王其政.统计能量法分析及其应用[M].北京理工大学出版社,1995
    [3]丁少春,等.运用统计能量法解决高频声振问题的研究[J].海军工程大学学报,2005,17(6):95-98
    [4]沈维道,等.工程热力学[M].北京:高等教育出版社,1983,36-103
    [5]倪振华.振动力学[M].西安交通大学出版社,1989:308-316
    [6]陈火红.MARC有限元实例分析教程[M].机械工业出版社,2002-02:295-297
    [7]梁超峰,欧进萍.结构阻尼与材料阻尼的关系[J].地震工程与工程振动,2006,26(1):50-54
    [8]Reymond Michael,Miller Mark.MSC/NASTRAN quick reference guide[M].The Mac Neal-Schwendler Corporation,2001

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心