大型火电厂钢结构主厂房弹性地震反应分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
钢框排架结构是我国火电厂主厂房的主要结构形式之一,但因其结构质量、刚度分布不均匀,所以对它的抗震性能研究尤为必要。采用弹性时程分析方法对大型火电厂钢框排架主厂房进行抗震分析,研究该类结构的动力特性、层间变形和层剪力等。计算结果表明:主厂房横向框排架和纵向框架-支撑结构存在较多的薄弱部位,计算分析应采用考虑扭转效应的空间模型。
The steel frame-bent structure is the main load-supporting structure in thermal power plants of China,whose structural quality and rigidity are distributed non-uniformly.It is particularly necessary to research earthquake resistant behavior of this structure.The time history response analysis method was used to study the dynamic properties,the interlayer deformation and the interlayer shear of steel frame-bent structures of main buildings for large thermal power plant.The results showed that there were many weak parts in the horizontal frame-bent and longitudinal frame-supporting structures,which must be strengthened when designed.The space model should be used to consider the effect of torsion in structural calculation and analysis.
引文
[1]范建忠.大型火电厂主厂房的结构选型[J].福建电与电工,1995,15(4):22-25.
    [2]彭修宁,薛建阳,刘祖强,等.刚性钢框架异型节点性能及设计方法[J].土木建筑与环境工程,2010,32(3):22-26.
    [3]薛建阳,刘祖强,彭修宁,等.钢结构异型节点受力性能及非线性有限元分析[J].西安建筑科技大学学报,2010,42(5):609-613.
    [4]薛建阳,胡宗波,彭修宁,等.钢结构箱形柱与梁异型节点破坏机理的试验研究[J].建筑结构学报,2010(增刊):50-54.
    [5]薛建阳,刘祖强,胡宗波,等.钢框架异型节点核心区的受剪机理及承载力计算[J].地震工程与工程振动,2010,30(5):37-41.
    [6]NEHRP Guidelines for the Seismic Rehabilitation of Buildings[S].FEMA-273,1997.
    [7]Gupta B,Kunnath S K.Adaptive Spectra-Based PushoverProcedure for Seismic Evaluation of Structures[J].EarthquakeSpectra,2000,16(2):367-391.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心