现场总线传感器的设计方法

详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文

英文篇名：The design method of the fieldbus -based intelligent sensor 中文刊名：仪器仪表用户 英文刊名：Electronics Instrumentation Customer 作者：吴刚 ; 庞彦斌 英文作者：WU Gang ; PANG Yan-bin (College of Information Science and Technology ; Beijing University of Chemical Technology ; Beijing 100029 ; China) 中文关键词：现场总线 ; 地震监测 ; 智能传感器 英文关键词：fieldbus ; earthquake rnonitorjintelligent sensor 出版日期：2005-04-08 机构：北京化工大学信息科学与技术学院,北京化工大学信息科学与技术学院 北京 100029 ,北京 100029 年：2005 期：02 出版单位：仪器仪表用户

摘要

讨论了现场总线传感器设计中需要考虑的问题,提出了一种设计总线传感器的基本方法,并在地震监测的应用中证明了所提出的观点。该方法对类似的应用,集成实现和设计方法也提供了参考。
This paper discusses considerations which must be made during the design of a fieldbus sensor. A method of designing a fieldbus sensor is raised, and the points are proved in the application of the earthquake monitoring. Reference is made to the circuitry required for such a design, the level of integration implemented and the design methodology.

引文

[1]项新建.基于RS-485总线的传感器网络化技术研究.传感器技术 2002,21(8):14-16
    [2] G.Y.Tian, Z.X. Zhao, R.W.Baines. A Fieldbus-based intelligent sensor. Mechatronics Volume: 10, Issue: 8, December 1, 2000. pp. 835-849
    [3] Smith G,Bowen M.Considerations for the Utilization of Smart Sensors. Sensors and Actuators A ,1995, 46-47: 521-524
    [4] Analog Device,Inc. 3V/5V, CMOS, 500mA.Signal Conditioning ADC AD7714 [M]. 1998.
    [5] ATMEL. AT89LV52 8-Bit Microcontroller with 8k Bytes Flash [M]. 1997.