超声波测定混凝土结构强度及厚度
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
对混凝土内部结构质量进行超声无损检测是保证混凝土结构内部安全、稳定的重要手段。混凝土结构强度与厚度的超声波无损检测关键在于准确识别直达波、反射波的起点。本文利用物理模型实验的方法,对所得到的各种波的波形特点进行分析验证,并最终将混凝土厚度、强度的多种观测方法应用于中国地质大学隧道的无损检测,收到了比较好的效果。
The technique of non-destructive detection for concrete structural quality using supersonic wave was an essential method to assure the construction safe and stable.The key of supersonic non-destructive detection for concrete intensity and thickness was to identify the start of direct and reflected wave.The characteristic of each wave was analyzed and checked by the method of physical modeling experiment.Finally,the method of detecting concrete thickness and intensity was applied to the non-destructive detection in channel of CUG,and the effect was very good.
引文
[1]吴慧敏.结构混凝土现场检测新技术[M].长沙:湖南大学出版社,1998.57-72.
    [2]刘红桂,南金生,马建军,等.用超声波无损检测技术检测混凝土厚度[J].地震学刊,1998,(1):56-60.
    [3]刘志存.混凝土路面厚度的超声波无损检测研究[J].宝鸡文理学院学报,2003,23(2):135-138.
    [4]童寿兴,王征,商涛平.混凝土强度超声波平测法检测技术[J].无损检测,2004,26(1):24-27.
    [5]陈建勋.隧道混凝土衬砌质量检测方法[J].长安大学学报,2002,22(3):51-54.
    [6]中华人民共和国城乡建设环境保护部.混凝土强度检验评定标准(GBJ107-87)[M].北京:中国计划出版社,1988.6-16.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心