天津津塔施工时变过程应力监测及数值分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在天津津塔上布置远程实时在线施工监测系统,以检验施工过程的安全及结构施工完成后的状态是否满足设计要求。用ANSYS的单元生死技术对结构在施工过程中慢性时变应力状态进行施工模拟,通过和监测结果进行对比,为结构施工的安全顺利进行提供了保障,并根据分析和监测结果指出进行施工预调的必要性。
A construction monitoring online and wireless system was placed on Tianjin Tower,which is developed according to the requirement of building owner to ensure construction safety and make the state of structure can be keep pace with the design.Meanwhile,the stress state in construction process of the tower was simulated by birth-death element of ANSYS.Through the comparison with the results of analysis and construction monitoring,the safety in the construction can be ensured,and it points out that it is necessary to perform the construction presetting value in construction.
引文
[1]李志强.金茂大厦的结构健康监测研究[D].上海:同济大学,2007.
    [2]欧进萍,关新春.土木工程智能结构体系的研究与发展[J].地震工程与工程振动,1999,19(2):21-28.
    [3]瞿伟廉,陈超,汪菁.深圳市民中心屋顶网架结构支撑钢牛腿瞬时应力场的识别[J].地震工程与工程振动,2002,22(4):41-46.
    [4]曾志斌,张玉玲.国家体育场大跨度钢结构卸载时应力监测系统[J].中国铁道科学,2008,29(1):139-143.
    [5]汪大绥,陆道渊,黄良,等.天津津塔结构设计[J].建筑结构学报,2009,30(S1):1-7.
    [6]天津津塔施工监测——施工监控第三次阶段报告[R].北京:中国建筑科学研究院,2009.
    [7]张勇.振弦式传感器的原理及校准方法[J].计量技术,2008(6):54-56.
    [8]傅学怡.高层建筑结构垂直荷载下的施工模拟计算[J].深圳大学学报:理工版,2003,20(4):8-13.
    [9]赵西安.钢筋混凝土高层建筑结构设计[M].2版.北京:中国建筑工业出版社,1995.
    [10]王光远.论时变结构力学[J].土木工程学报,2000,33(6):105-108.
    [11]MELBOURNE C,BULLMAN P.Load relieving systems[J].Proc Int Conf on Non-conventional Structures,1987(2):1-6.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心