摘要
工程中经常遇到一些在役运行的塔,由于塔结构改变或其它原因,而造成塔地脚螺栓面积核算不够的现象发生,如何在既不影响正常生产,又能保证设备安全运行的情况下,解决塔地脚螺栓面积不够的问题,本文将介绍采用加固螺栓方法。
With some courses, the problem of insufficient area of anchor bolt occurs in some columns in service. To make the equipment operate normally and in safe condition, one specific method was introduced in this paper.