百万千瓦级压水堆核电厂核岛土建设计的厂址适应性分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
以我国现有的百万千瓦级压水堆核电厂为对象,应用有限元分析软件ANSYS,通过对各种载荷组合工况和楼层反应谱进行全面分析评估,揭示了现有设计的厂址适应能力,分析给出了现有设计厂址的核岛厂房土建设计和楼层反应谱的适应性等主要包络参数范围。分析结果表明,现有结构设计的厂址适应范围较为广泛,抗震设计的厂址适应范围稍微偏窄。
The site adaptability of one kind of standard design of the 1000MW pressurized water reactor plant is investigated in this paper,and the enveloped parameters scope are acquired as an important results employing the universal finite element software ANSYS.These parameters package,which show the site adaptability boundary conditions for the current design,mainly concern about the structural design and floor response spectra of the buildings in nuclear island.The analysis results demonstrate that the site adaptation range for the current structural design is wide,but that for the seismic design is narrow.
引文
[1]李忠诚.AP1000厂址包络特征及其对中国潜在厂址的适应性分析[J].国际电力,2005,9(5):43-45.
    [2]李忠诚,杨孟嘉.AP1000抗震分析与设计特点研究[J],世界地震工程,2008,(1):137-142.
    [3]李忠诚.EPR厂址包络参数及其对中国一潜在厂址的适应性分析[J].国际电力,2005,9(6):24-26.
    [4]RCC-G 86,90万千瓦压水堆核电站土建设计和建造规则[S].1986.
    [5]中国核工业总公司.压水堆核电厂核安全有关的混凝土结构设计规范(EJ/T925-95)[S],1995.
    [6]中国核工业总公司.压水堆核电厂预应力混凝土安全壳设计规范(EJ/T926-95)[S],1995.
    [7]ASCE 4-98,Seismic Analysis of Safety-Related NuclearStructures and Commentary on Standard for SeismicAnalysis of Safety-Related Nuclear Structures[S].
    [8]NRC RG 1.60-1973,Design Response Spectra forSeismic Design of Nuclear Power Plants[S].
    [9]NRC Standard Review Plan.NUREG-0800[S].1975.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心