换填砂垫层的实用优化设计法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
考虑从基坑开挖到垫层回填整个过程,建立以规范为约束的换填砂垫层优化设计实用模型,通过算例分析了取不同砂垫层承载力标准值对优化结果的影响。实例计算表明:与试算法设计相比,采用该优化设计方法不但能够减少砂垫层的换填量,而且可以直接得出基坑的最优挖方量。
Considering the whole process of the cushion from the excavation to backfilling,we constructed the optimization utility model for replacement sand cushion under consideration of code as constraint.According to this model,we analyzed the impact of different standard values of bearing capacity of sand cushion against the optimal results by an example.The example shows that compared with the trial algorithm design,the use of this optimization method can not only reduce the amount of sand cushion filling but also be able to directly derive the optimal pit excavation volume.
引文
[1]张炳华,侯昶.土建结构优化设计[M].2版.上海:同济大学出版社,1998.
    [2]刘巍,王青娟.换填法地基处理相关问题讨论[J].矿山机械,1999(12):64-66.
    [3]侍倩.地基处理技术[M].武汉:武汉大学出版社,2011.
    [4]赵行立,王贻荪.换填法垫层厚度的实用计算法[J].住宅科技,1998(4):11-14.
    [5]梅玉龙,陶桂兰.换填法垫层厚度优化设计[G]//中国海洋工程学会.第十二届中国海岸工程学术讨论会论文集.北京:海洋出版社,2005:786-789.
    [6]谢祚水.结构优化设计概论[M].北京:国防工业出版社,1997.
    [7]左名麟,刘永超,孟庆文,等.地基处理实用技术[M].北京:中国铁道出版社,2005.
    [8]中航勘察设计研究院,秦四清.深基坑工程优化设计[M].北京:地震出版社,1998.
    [9]JGJ79—2002建筑地基处理技术规范[S].
    [10]GB50007—2002建筑地基基础设计规范[S].
    [11]陈军斌,杨悦.最优化方法[M].北京:中国石化出版社,2011.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心