基于模糊技术的无模铸型制造工艺参数的研究

详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文

英文篇名：Research of Process Parameters of PCM Technique Based on Fuzzy Technology 中文刊名：河北工业大学学报 英文刊名：Journal of Hebei University of Technology 作者：杨伟东 ; 刘丽冰 ; 颜永年 英文作者：YANG Wei-dong 1 ; LIU Li-bing 1 ; YAN Yong-nian 2 ( 1. School of Mechanial Engineering ; Hebei University of Technology ; Tianjin 300130 ; China ; 2. Department of Mechnical Engineering ; Tsinghua University ; Beijing 100084 ; China) 中文关键词：无模铸型制造 ; 工艺规划 ; 多目标模糊决策 ; 工艺参数 英文关键词：patternless casting manufacturing technique ; process planning ; multi-objective fuzzy decision-making ; technical parameter 出版日期：2007-12-15 机构：河北工业大学机械工程学院,河北工业大学机械工程学院,清华大学机械工程系 天津300130,天津300130,北京100084 年：2007 期：06 出版单位：河北工业大学学报

摘要

无模铸型制造工艺(PCM)中成型要求和工艺规划的矛盾性和不可公度性使得工艺参数选择复杂化,应用多目标模糊决策确定无模铸型制造工艺成型方向、层厚、填充间距等工艺参数的方法,在满足用户加工要求的前提下提高了成型的质量和速度.
It is difficult to achieve a balance in conflicting between users' demands and process planning in Patternless Casting Manufacturing Technique (PCM). Multi-objective fuzzy decision-making is used to optimize the process para-meters such as building orientation, layer height and so on, which have greatly improved the production efficiency and quality.

引文

[1]Yang Weidong,Yan Yongnian,Xu Dan,et al.Factors Affecting Forming Precision in Patternless Casting Manufacturing[J].Chinese Journal of Mechanical Engineering,2003,16(2):209-212.
    [2]ChengW,Fuh J Y H.Multi Objective Optimization of Part Building Orientation in Stereolithography[J].Rapid Prototyping Journal,1995,1(4):12-23.
    [3]冯德益,楼世博.模糊数学方法与应用[M].北京:地震出版社,1983.
    [4]胡福祥.多目标模糊决策在台阶高度优化中的应用[J].金属矿山,2000(4):20-22.
    [5]李希灿,张维,宋岩.多目标多层次系统多维模糊决策理论模型[J].模糊系统与数学,1999,13(2):62-69.