钢筋混凝土异形柱平截面假定适用性初探
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用通用有限元分析软件ANSYS的SOLID65和LINK8单元,对处于压、弯、剪、扭复杂受力状态下肢宽厚比为4∶1的十形柱、L形柱和T形柱进行了单调加载计算机模拟,同时采用基于有限单元柔度法的纤维模型梁柱单元进行对比分析,对平截面假定在异形柱非线性分析中的适用性进行了初步探讨。结果表明,对于肢宽厚比小于或等于4∶1的异形柱,采用平截面假定进行分析基本可行。
Adopting the element SOLID65 and LINK8 in the general finite element analysis software ANSYS and fiber model beam-column element based on finite element flexibility method respectively, the comparative analysis of the cross, L and T-shaped RC columns under compression, bending, shear and torsion with flange width-thickness ratio of 4:1 is carried out. The applicability of plane section assumption in the nonlinear analysis is discussed primarily, which shows that it is feasible on the whole for shaped RC columns with flange width-thickness ratio equal to or smaller than 4:1.
引文
[1] 何广杰.钢筋混凝土异形柱的受力特点及工程设计探讨〔J〕.四川建筑,1996,16(2):7-10.
    [2] 曹万林,王光远,欧进萍,等.周期反复荷载作用下钢筋混凝土十字形柱的性能〔J〕.地震工程与工程振动,1994,14(3):60-67.
    [3] 曹万林,王光远,吴建有,等.不同方向周期反复荷载作用下L形柱的性能〔J〕.地震工程与工程振动,1995,15(1):67-72.
    [4] 曹万林,王光远,魏文湘,等.不同方向周期反复荷载作用下T形柱的性能〔J〕.地震工程与工程振动,1995,15(4):76-84.
    [5] 黄宗明,陈滔.基于有限单元柔度法和刚度法的非线性梁柱单元比较研究〔J〕.工程力学,2003,20(5):24-31.
    [6] 陈滔.基于有限单元柔度法的钢筋混凝土框架结构三维非弹性地震反应分析〔D〕.重庆:重庆大学,2003.
    [7] FabioF.Taucer.EnricoSpacone,FilipC.Filippou.AFiberBeam-ColumnElementForSeismicResponseAnslysisofReinforcedConcreteStructures〔R〕.UniversityofCalifornia,Berkeley,1991.
    [8] B.D.Scott,R.Park,M.J.N.Priestley.Stress-strainBehaviorofConcreteConfinedbyOverlappingHoopsatLowandHighStrainRates〔J〕.ACIJournal,1982,79:13-27.
    [9] 叶列平.混凝土结构(上册)〔M〕.北京:清华大学出版社,1999.
    [10] R.帕克,T.波利著,秦文钺等译.钢筋混凝土结构〔M〕.重庆:重庆大学出版社,1986.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心