后张预应力混凝土结构抗震优化
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
跨度较大的梁由于弯矩较大,现阶段设计人员已普遍采用预应力混凝土,通过预应力的等效弯矩,部分减少各跨中、支座截面的拉应力,以达到同时满足抗裂和极限承载的要求,但如果设计施工不当,可能造成梁端弯矩远大于柱端,梁柱节点遭到削弱,以及柱抗震能力下降等不利于抗震的情况,本文主要针对这些问题从设计和施工两方面采取的优化措施进行论述。
The big-span beams now have been widely designed with prestressed concrete because their moments are very large,The prestressed equivalent bending moments deduct the stretching stress of mid-span and beam end face,which can meet the requirements of crack-resistant and over-load.But the design and construction are not correctly,that can caused the beam support moment much bigger than the column,the coumn weaker and beam-column joint decreased.This paper summarized the seismic resistance optimum methods on these problems from design and construction.
引文
[1]JGJ140-2004.预应力混凝土结构抗震设计规程[S].
    [2]R.park,K.J.Thompson Load Deformation Behav-iors of Beam-Column Assemblies.Proceeding of the 8th Con-gress of the FIP[M].Landon,Bath2,1978,P1-R02
    [3]K.J.Thompson,R.Park,Ductility of Prestressed andPartially Prestressed Concrete Beam Sections.J.PCI.1980,25(2):46-70
    [4]薛伟辰、程斌,李杰.低周反复荷载下预应力高性能混凝土梁的抗震性能[J].地震工程与工程振动,2003年第1期.
    [5]孙巍巍,孟少平,吴京.多跨超长预应力混凝土框架结构抗震能力研究,工业建筑,2006,36(5)
    [6]GB50011-2001,建筑抗震设计规范.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心