引文
[1]THORBURN L J,KULAK G L,MONTGOMERY CJ.Analysis of Steel Plate Shear Walls[R].Edmonton:University of Alberta,1983.
[2]刘建彬.防屈曲支撑及防屈曲支撑钢框架设计理论研究[D].北京:清华大学,2005.LIU Jian-bin.Research on the Design Theory ofBuckling-restrained Braces and Buckling-restrainedBraced Frames[D].Beijing:Tsinghua University,2005.
[3]董全利.防屈曲钢板剪力墙结构性能与设计方法研究[D].北京:清华大学,2007.DONG Quan-li.Studies on Structural Behavior andDesign Method of Buckling-restrained Steel PlateShear Wall[D].Beijing:Tsinghua University,2007.
[4]SABOURI-GHOMI S,GHOLHAKI M.Ductility ofThin Steel Plate Shear Walls[J].Asian Journal ofCivil Engineering:Building and Housing,2008,9(2):153-166.
[5]JGJ 99—98,高层民用建筑钢结构技术规程[S].JGJ 99—98,Technical Specification for Steel Struc-ture of Tall Buildings[S].
[6]ASTANEH-ASL A.Seismic Behavior and Design ofSteel Plate Shear Walls[R].Berkeley:University ofCalifornia,2001.
[7]陈国栋,郭彦林,范珍,等.钢板剪力墙低周反复荷载试验研究[J].建筑结构学报,2004,25(2):19-26.CHEN Guo-dong,GUO Yan-lin,FAN Zhen,et al.Cyclic Test of Steel Plate Shear Walls[J].Journal ofBuilding Structures,2004,25(2):19-26.
[8]ROBERTS T M.Seismic Resistance of Steel PlateShear Walls[J].Engineering Structures,1995,17(5):344-351.
[9]CAN/CSA-S16-01,Limit States Design of SteelStructures[S].
[10]FEMA 450,Recommended Provisions for SeismicRegulations for New Buildings and Other Structures[S].
[11]缪友武.两侧开缝钢板剪力墙结构性能研究[D].北京:清华大学,2004.MIAO You-wu.The Investigation to Structural Be-havior of Steel Plate Shear Wall Slotted at Two Edges[D].Beijing:Tsinghua University,2004.
[12]郭彦林,缪友武,董全利.全加劲两侧开缝钢板剪力墙弹性屈曲研究[J].建筑钢结构进展,2007,9(3):58-62.GUO Yan-lin,MIAO You-wu,DONG Quan-li.ElasticBuckling Behavior of Stiffened Steel Plate Shear WallsSlotted at Two Edges[J].Progress in Steel BuildingStructures,2007,9(3):58-62.
[13]NAKASHIMA M,AKAWAZA T,TSUJI B.Strain-hardening Behavior of Shear Panels Made of Low-yield SteelⅡ:Model[J].Journal of Structural Engin-eering,1995,121(12):1750-1757.
[14]VIAN D.Steel Plate Shear Walls for Seismic Designand Retrofit of Building Structures[D].Buffalo:TheState University of New York at Buffalo,2005.
[15]BERMAN J W,BRUNEAU M.Experimental Investi-gation of Light-gauge Steel Plate Shear for the Seis-mic Retrofit of Buildings[R].Buffalo:MultidisciplinaryCenter for Earthquake Engineering Research,2003.
[16]郭彦林,郑浩然.彩板波形拱壳屋面结构折曲屈曲试验研究[J].工业建筑,1997,27(11):30-33.GUO Yan-lin,ZHENG Hao-ran.Crinkle CollapseMode of Arch Roof Structure with Color CorrugatedSteel Sheet Section[J].Industrial Construction,1997,27(11):30-33.
[17]HITAKA T,MATSUI C.Experimental Study onSteel Shear Wall with Slits[J].Journal of StructuralEngineering,2003,129(5):586-595.
[18]蒋路.带缝钢板剪力墙试验报告[R].上海:同济大学,2008.JIANG Lu.Test of Steel Plate Shear Wall with Slits[R].Shanghai:Tongji University,2008.
[19]曹春华,郝际平,王迎春,等.开缝薄钢板剪力墙低周反复荷载试验研究[J].西安建筑科技大学学报:自然科学版,2008,40(1):46-52.CAO Chun-hua,HAO Ji-ping,WANG Ying-chun,et al.Cyclic Test of Thin Steel Plate Shear Wall withSlits[J].Journal of Xi an University of Architecture&Technology:Natural Science Edition,2008,40(1):46-52.
[20]魏德敏,温沛纲,卞宗舒.新型带缝钢板剪力墙的试验研究及其数值模拟[J].地震工程与工程振动,2006,26(1):129-133.WEI De-min,WEN Pei-gang,BIAN Zong-shu.Ex-perimental Investigation and Simulation Analysis ofNew Steel Plate Shear Walls with Slits[J].Earth-quake Engineering and Engineering Vibration,2006,26(1):129-133.
[21]ASTANEH-ASL A.Seismic Behavior and Design ofComposite Steel Plate Shear Walls[R].Berkeley:Uni-versity of California,2002.
[22]ZHAO Q H,ASTANEH-ASL A.Cyclic Behavior ofTraditional and Innovative Composite Shear Walls[J].Journal of Structural Engineering,2004,130(2):271-284.
[23]郭彦林,董全利,周明.防屈曲钢板剪力墙滞回性能理论与试验研究[J].建筑结构学报,2009,30(1):31-39.GUO Yan-lin,DONG Quan-li,ZHOU Ming.Testsand Analysis on Hysteretic Behavior of Buckling-restrained Steel Plate Shear Walls[J].Journal ofBuilding Structures,2009,30(1):31-39.
[24]郭彦林,董全利,周明.防屈曲钢板剪力墙弹性性能及混凝土盖板约束刚度研究[J].建筑结构学报,2009,30(1):40-47.GUO Yan-lin,DONG Quan-li,ZHOU Ming.ElasticBehavior and Minimum Restraining Stiffness of Buck-ling-restrained Steel Plate Shear Walls[J].Journal ofBuilding Structures,2009,30(1):40-47.
[25]郭彦林,周明,董全利.防屈曲钢板剪力墙弹塑性抗剪极限承载力与滞回性能研究[J].工程力学,2009,26(2):108-114.GUO Yan-lin,ZHOU Ming,DONG Quan-li.Hyster-etic Behavior of Buckling-restrained Steel Plate ShearWall[J].Engineering Mechanics,2009,26(2):108-114.
[26]GUO Yan-lin,DONG Quan-li.Static Behavior ofBuckling-restrained Steel Plate Shear Walls[C]//CHEUNG Y K,CHAU K W.Proceedings of the 6thInternational Conference on Tall Buildings.HongKong:World Scientific Publishing Company,2005:666-670.
[27]DONG Quan-li,GUO Yan-lin.Ultimate Shear Cap-acity of Buckling-restrained Steel Plate Shear Walls[C]//HERA.Proceeding of Eighth Pacific StructuralSteel Conference-Steel Structures in Natural Haz-ards.Wairakei:HERA,2007:335-340.
[28]蔡克铨,林盈成,林志翰.钢板剪力墙抗震行为与设计[C]//李国强.第四届海峡两岸及香港钢结构技术交流会论文集.上海:同济大学出版社,2006:108-116.CAI Ke-quan,LIN Ying-cheng,LIN Zhi-han.SeismicResponses and Design of Steel Plate Shear Wall[C]//LI Guo-qiang.Proceedings of the Fourth Cross-strait&Hong Kong Conference on Steel Structures.Shang-hai:Tongji University Press,2006:108-116.
[29]蔡克铨,林盈成,林志翰.钢板剪力墙抗震行为与设计[J].建筑钢结构进展,2007,9(5):19-25.CAI Ke-quan,LIN Ying-cheng,LIN Zhi-han.SeismicResponses and Design of Steel Plate Shear Wall[J].Progress in Steel Building Structures,2007,9(5):19-25.
[30]孙飞飞,高辉,李国强.两边组合钢板墙的试验研究[C]//李国强.第四届海峡两岸及香港钢结构技术交流会论文集.上海:同济大学出版社,2006:281-291.SUN Fei-fei,GAO Hui,LI Guo-qiang.ExperimentalResearch on Two-sided Composite Steel Plate Walls[C]//LI Guo-qiang.Proceedings of the Fourth Cross-strait&Hong Kong Conference on Steel Structures.Shanghai:Tongji University Press,2006:281-291.
[31]高辉.组合钢板剪力墙试验研究与理论分析[D].上海:同济大学,2007.GAO Hui.Experimental and Theoretical Studies onComposite Steel Plate Shear Walls[D].Shanghai:Tongji University,2007.
[32]ELGAALY M.Thin Steel Plate Shear Walls Behaviorand Analysis[J].Thin-walled Structures,1998,32(1/2/3):151-180.
[33]王迎春,郝际平,李峰,等.钢板剪力墙力学性能研究[J].西安建筑科技大学学报:自然科学版,2007,39(2):181-186.WANG Ying-chun,HAO Ji-ping,LI Feng,et al.Study on Mechanical Property of Steel Plate ShearWalls[J].Journal of Xi an University of Architecture&Technology:Natural Science Edition,2007,39(2):181-186.
[34]楼梦麟,李守继.低矮小开口剪力墙自由振动问题的半解析解[J].建筑科学与工程学报,2006,23(3):50-53.LOU Meng-lin,LI Shou-ji.Semi-analytical Solutionfor Free Vibration of Short Shear Wall with SmallOpenings[J].Journal of Architecture and Civil En-gineering,2006,23(3):50-53.
[35]沈蒲生,刘杨.水平地震作用下框支剪力墙结构的变形研究[J].建筑科学与工程学报,2005,22(1):58-63.SHEN Pu-sheng,LIU Yang.Distortion Research ofShear Wall Structure Supported on Frame UnderEarthquake Actions[J].Journal of Architecture andCivil Engineering,2005,22(1):58-63.
[36]黄琪.波形钢腹板设计研究[J].长安大学学报:自然科学版,2009,29(3):73-76.HUANG Qi.Design Study on the Corrugated SteelWebs[J].Journal of Chang an University:NaturalScience Edition,2009,29(3):73-76.
[37]赵均海,张兆强,魏雪英,等.固支圆板在线性荷载作用下的极限解[J].长安大学学报:自然科学版,2008,28(1):81-86.ZHAO Jun-hai,ZHANG Zhao-qiang,WEI Xue-ying,et al.Plastic Limit Analysis of Clamped Circular PlateUnder Linear Distributed Load[J].Journal ofChang an University:Natural Science Edition,2008,28(1):81-86.
[38]王茜,王春生,俞欣,等.钢桥塔局部稳定试验与数值分析[J].长安大学学报:自然科学版,2008,28(5):67-72.WANG Qian,WANG Chun-sheng,YU Xin,et al.Ex-perimental Investigation and Numerical Analysis onLocal Buckling Behavior of Steel Bridge Towers[J].Journal of Chang an University:Natural Science Edi-tion,2008,28(5):67-72.