基于双曲线型Mohr强度准则下锚索极限抗拔力研究

英文篇名：Study on ultimate pulling force of anchor base on hyperbolic Mohr strength criterion
中文刊名：煤炭工程
英文刊名：Coal Engineering
作者：刘伟平 ; 扶名福 ; 罗小艳 ; 胡小荣
英文作者：LIU Wei-ping1 ; FU Ming-fu1 ; LUO Xiao-yan2 ; HU Xiao-rong1(1.School of Civil Engineering and Architecture ; Nanchang University ; Nanchang 330031 ; China ; 2.Jiangxi Technology Normal Collage ; Nanchang 330013 ; China))
中文关键词：双曲型强度包络线 ; 预应力锚索 ; 极限抗拔力
英文关键词：hyperbolic strength envelope ; pre-stressed anchor ; ultimate pulling force
出版日期：2010-03-15
机构：南昌大学建筑工程学院;江西科技师范学院;
年：2010
期：03
出版单位：煤炭工程

摘要

基于双曲线型Mohr强度准则和极限平衡原理,研究了预应力锚索的极限抗拔力。锚索的极限抗拔力受到岩土体的种类、破裂面的形状、灌浆压力和围岩压力等影响,研究结果表明:随着灌浆压力的增加,极限抗拔力也相应增加。其结果可以为锚索的工程应用提供理论依据。
Base on the hyperbolic Mohr strength criterion and ultimate balance principle,the ultimate pulling force of the pre-stressed anchor was studied.The ultimate pulling force of the anchor would be influenced by the type of the rock and soil mass,shape of the cracking surface,grouting pressure,surrounding rock pressure and others.The study results showed that with the grouting pressure increased,the ultimate pulling force also would be increased.The results could provide the theoretical references to the application of the anchor project.

引文

[1]何思明,李新坡.预应力锚杆作用机制研究[J].岩石力学与工程学报,2006,25(9):1876~1880.
    [2]汪海滨,高波.预应力锚索荷载分布机理原位试验研究[J].岩石力学与工程学报,2005,12(4):2113~2118.
    [3]何思明,王成华.预应力锚索破坏特性及极限抗拔力研究[J].岩石力学与工程学报,2004,23(17):2966~2971.
    [4]邓宗伟,冷伍时,李志勇,等.基于统一强度准则的预应力锚索极限承载力计算[J].岩石力学与工程学报,2007,26(6):1138~1144.
    [5]赵彭年.松散介质力学[M].北京:地震出版社,1995.