稳定型硅油基磁流变液的制备及性能

英文篇名：Preparation and Properties of Stable Silicon-Oil-Based Magneto-Rheological Fluid
中文刊名：机械工程材料
英文刊名：Materials for Mechanical Engineering
作者：姚金光 ; 晏华
英文作者：YAO Jin-guang ; YAN Hua(Department of Chemical and Material Engineering ; Logistics Engineering University ; Chongqing 400016 ; China)
中文关键词：磁流变液 ; 羰基铁粉 ; 硅油 ; 稳定性 ; 添加剂
英文关键词：magneto-rheological fluid ; carboxyl iron powder ; silicon oil ; stability ; additive
出版日期：2010-11-20
机构：后勤工程学院化学与材料工程系;
年：2010
期：11
出版单位：机械工程材料

摘要

以羰基铁粉为磁性颗粒,硅油为载液,添加了硅烷偶联剂和纳米SiO2,通过球磨机球磨分散的方法制备磁流变液;采用NXS-11D旋转黏度计、自然沉降法和MRTS-01型磁流变仪分别对其黏度、沉降稳定性和流变性能进行了测试。结果表明:磁流变液零场黏度较低,为0.675 Pa.s,零场黏度随着剪切速率的增大而减小,表现出剪切稀化现象,属于弱Bingham流体;磁流变液具有较好的沉降稳定性,3个月的沉降率为13%,无板结现象,搅拌很容易再分散,表现为软性沉降;在磁场强度为0.6 T时,剪切应力能够达到60 kPa。
Taking carboxyl iron powders and silicon oil as magnetic particles and carrier fluid separately,adding silane coupling agent and nano-SiO2,magneto-rheological fluid was prepared by the method of using ball mill to disperse.Through utilizing NXS-11D rotational viscometer,natural sedimentation method and MRTS-01 magnetic rheometer to test viscosity,sedimentation stability and rheological properties of the magneto-rheological fluid.The results show that zero-field viscosity of the magneto-rheological fluid was low which was 0.675 Pa·s.It decreased with the increasing of shear rate and showed shear-thinning phenomenon,which manifested the magneto-rheological fluid belonged to weak Bingham fluid.The fluid had good sedimentation stability,whose sedimentation rate for 3 months was 13% and no harden phenomenon appeared.It was quite easy to re-disperse after mixing,that presented as soft sedimentation.The shear stress could reach 60 kPa when the magnetic field intensity was 0.6 T.

引文

[1]刘奇,张平,王东亚,等.磁流变体材料的制备及性能研究[J].功能材料,2001,32(3):257-259.
    [2]CARLSONJ D.Magnetorheological fluid actuators[C]//In:Janocha H.Adaptronics and Smart Structures.Berlin:Springer-Verlag Berlin Heidelberg,1999:180-195.
    [3]姚金光,晏华.高性能磁流变液研究的进展[J].材料开发与应用,2009,24(2):62-67.
    [4]潘双夏,杨礼康,冯培恩.磁流变液减振控制应用的研究动态[J].汽车工程,2002,24(3):254-258.
    [5]江万权,张复殿,陈祖耀,等.羰基铁粉表面纳米钴修饰及其对磁流变液性能的影响[J].功能材料,2006,37(7):1163-1165.
    [6]CARLSONJ D,WEISS K D.A growing attraction to mag-netic fluids[J].Machine Design,1994(8):61-64.
    [7]HOUSNER G W,BERGMAN L A,CAUGHEY T K,et al.Structural control:past,present,and future[J].Journal ofEngineering Mechanics,1997,123(9):938-942.
    [8]欧进萍,关新春.可控流体减振驱动器的研究与应用[J].世界地震工程,1999,14(4):30-41.
    [9]赵雯,张秋禹,王结良,等.磁流变液及其应用[J].材料导报,2004,18(5):68-71.
    [10]浦鸿汀,蒋峰景,杨正龙.以碳纳米管作为抗沉降剂的高性能磁流变液及其制备方法:中国,CN 1658341A[P].2005-08-24.
    [11]胡林,张朝平,郑璐瑶,等.磁悬浮流体中颗粒对分散体系流变性的影响[J].贵州大学学报,2000,17(3):194-198.
    [12]张平,刘奇,王东亚,等.磁流变体的制备及性能[J].化学物理学报,2001,14(5):559-561.
    [13]拉甫罗夫N C.胶体化学实验[M].北京:高等教育出版社,1992:134.
    [14]胡林,付伟,张朝平,等.磁流变液沉降稳定性改进及对流变性能的影响[J].贵州大学学报,2001,18(3):176-180.
    [15]关新春,李金海,欧进萍.软性沉降磁流变液的研制及性能实验研究[J].功能材料与器件学报,2004,10(1):115-119.
    [16]王玉铨,王焕定,徐国涵,等.用均匀设计法制备性能优良的磁流变液[J].哈尔滨工业大学学报,2005,37(1):52-59.