焊接箱型柱纵向残余应力的几个影响因素

英文篇名：Several Influencing Factors for the Longitudinal Residual Stress of Welded Box Column
中文刊名：甘肃科学学报
英文刊名：Journal of Gansu Sciences
作者：孙玉萍 ; 王晓杰
英文作者：SUN Yu-ping ; WANG Xiao-jie(College of Civil Engineering ; Lanzhou University of Science and Technology ; Lanzhou 730050 ; China)
中文关键词：极限承载力 ; 三维热弹塑性 ; 箱型柱 ; 残余应力
英文关键词：ultimate bearing capacity ; three dimensional thermal elastic-plasticity ; box column ; residual stress
出版日期：2011-06-25
机构：兰州理工大学土木工程学院;
年：2011
期：02
出版单位：甘肃科学学报

摘要

焊接产生的残余应力是影响受压构件极限承载力的重要因素.以ANSYS为平台用三维热弹塑性有限元法模拟焊接过程,得到焊接箱型柱不同柱高下纵向残余应力的分布,比较了焊接顺序和不同焊层数对残余应力的影响,为焊接柱结构设计提供了参考.
The residual stress produced by welding is the most important factor affecting the ultimate bearing capacity of the box column.Based on ANSYS system,the whole welding process is simulated by three dimensional thermal elastic-plastic finite element method.From calculated results we know the distribution of the longitudinal residual stress.The sequence of welding and different numbers of welded layers are related to the residual stress,so it can provide some references for the practical engineering.

引文

[1]陈冀.钢结构稳定理论与设计[M].北京:科学出版社,2008,55-59.
    [2]汤夕春,贺晓川.残余应力峰值对H型钢柱极限承载力的影响研究[J].国外建材科技,2006,27(6):52-57.
    [3]孙玉萍,王云,王万祯,等.钢框架梁柱弱轴连接节点地震下的断裂行为[J].甘肃科学学报,2008,20(2):53-56.
    [4]Zhang J,Dong P.Residual Stresses in Welded Moment Framesand Implications for Structural Performance[J].Journal ofStructural Engineering,2000,126(3):306-315.
    [5]Wang R,Zhang J X.Study of Welding Inherent Deformationsin Thin Plates Based on Finite Element Analysis Using Inter-active Substructure Method[J].Materials and Design,2009,30(9):3 474-3 481.
    [6]Yoshiaki Goto.Change of Weld Residual Stresses due to Loss ofMaterial[J].Structural Engineering,2006,132(12):1 940-1 947.
    [7]刘兴龙.基于ANSYS的焊接过程有限元模拟[J].电焊机,2007,37(7):41-44.
    [8]曙光,谢桂兰.ANSYS操作命令与参数化编程[M].北京:机械工业出版社,2004:155-179.
    [9]宋天民.焊接残余应力的产生与消除[M].北京:中国石化出版社,2004:25-40.