夹芯砌体弹性模量的试验研究

英文篇名：Experimental Research on Elastic Modulus of Sandwich Composile Masonry
中文刊名：混凝土与水泥制品
英文刊名：China Concrete and Cement Products
作者：范飞 ; 杨光 ; 黄月玲 ; 李锋 ; 胡蕾
英文作者：FAN Fei ; YANG Guang ; HUANG Yue-ling ; Ll Feng ; HU Lei
中文关键词：夹芯砌体 ; 装饰砖 ; 弹性模量 ; 准泊松比
英文关键词：Sandwich composite masonry ; Decorative bricks ; Elastic modulus ; Quasi Poisson's ratio
出版日期：2011-08-20
机构：中冶建筑研究总院有限公司;西安欧亚学院建筑工程学院;陕西建工集团第七建筑工程有限公司;
年：2011
期：08
出版单位：混凝土与水泥制品

摘要

作为新型墙材,烧结页岩装饰多孔砖在工程中近年来发展十分迅速,它有着高强、质密等特点,又能保护耕地、节约能源。本文主要分析了用其砌筑的四个强度等级水泥砂浆砌筑的4组24个试件的变形特征,对该砌体弹性模量进行了计算分析,通过数据回归,提出了夹芯砌体弹性模量建议计算公式。
As a new wall material,sintering shale decorative porous bricks are developing very rapidly in recent years.The sintering shale decorative porous bricks have the characteristics of high strength,mass density,and they can also protect the farmland and be energy conservation.In this paper,the deformation features of 24 test specimens as 4 groups bricklaying by cement mortar with 4 strength grades are analyzed.The elastic modulus of sandwich composite masonry with sintered shale decorative porous bricks is calculated and analyzed.Through the data regression,the suggested calculation formula for the elastic modulus of sandwich composite masonry is proposed.

引文

[1]刘桂秋.砌体结构基本受力性能的研究[D].湖南大学博士学位论文.湖南大学土木工程学院.2005.
    [2]尚建丽,陈家玮,范飞.夹芯节能复合墙砌体抗压性能的试验研究[J].新型建筑材料.2008(11):29-32.
    [3]GBJ129-90.砌体基本力学性能试验方法标准[S].北京:中国建筑工业出版社,1990.
    [4]Masonry standards Joint Committee.Building Code Require-ments for Masonry Structures,ACI530-02/ASCE-02/TMS402-02.American Concrete Institute.Ameriean Society of CivilEngineering and the Masonry Society,New York,2002:32-38.
    [5]International Conefrenee of Building Offieials,Whiter,CA.UniofrmBuilding Code,ChaPter24:Masonry,1991:l-45.
    [6]GB50003-2001.砌体结构设计规范[S].北京:中国建筑工业出版社,2002.
    [7]王庆霖.砌体结构[M].北京:地震出版社,1993.
    [8]苏小卒主编.砌体结构设计[M].上海:同济大学出版社,2002.