汽车主减速器总成在线检测系统研究

英文篇名：The Development of the On-line Examination System for the Automotive Main Reducer Assembly
中文刊名：机械工程师
英文刊名：Mechanical Engineer
作者：王淑旺 ; 关鹏
英文作者：WANG Shu-wang ; GUAN Peng(School of Machinery and Automobile Engineering ; Hefei University of Technology ; Hefei 230009 ; China)
中文关键词：主减速器总成 ; 阶次分析 ; 在线检测
英文关键词：main reducer assembly ; order analysis ; on-line examination
出版日期：2011-02-10
机构：合肥工业大学机械与汽车工程学院;
年：2011
期：02
出版单位：机械工程师

摘要

主要介绍了以阶次分析为核心的主减速器总成在线检测系统的组成及技术实现。系统作为主减速器柔性装配线的最后一道工序,以阶次分析为核心,实现对转速、转矩及振动信号等实时数据的采集、处理、显示和存储。该系统可以实现对多种减速器总成的综合性能的检测,并可以通过预先设定的评判策略对产品性能做出评测。
This paper introduces the constitution and technique realization of the on-line examination system for the main reducer assembly based on order analysis.The examination system is the last procedure of the flexible assembly line for the main reducer assembly.Order analysis is the core of the system.The system can examine general performance of several kinds of main reducer assemblies by real time acquisition,processing,display and store of rev,torque and signal of vibration datum.The system can give an evaluation on the performance of the production by the pre-set evaluation measure set before.

引文

[1]WANG W Y.Identification of Gear Mesh Signal by KurtosisMaximization and Its Application to CH46 Helicopter GearboxData[C]//Proceedings of the 11th IEEE Signal ProcessingWorkshop on Statistical Signal Processing,2001:69-372.
    [2]李辉,郑海起,唐力伟.基于阶次跟踪和变换时频谱的轴承故障诊断[J].振动、测试与诊断,2010,30(2):138-142.
    [3]National Instruments.LabVIEW Order Analysis Toolset UserManua[lZ].2005.
    [4]赵晓平,张令弥,郭勤涛.旋转机械阶比跟踪技术研究进展综述[J].地震工程与工程振动,2008(12):213-219.
    [5]BOSSLEY K M,MCkendrick R J.Hybrid computed ordertracking[J].Mechanical Systems and Signal Processing,1999,13(4):627-641.