加速度峰值对高面板堆石坝面板动应力的影响研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用三维非线性有限元方法,分析了高面板堆石坝的混凝土面板在不同输入加速度峰值作用下的动力反应。计算结果表明,面板的顺坡向峰值动应力发生在0.8倍坝高附近,坝轴向峰值动应力发生在坝顶中间部位的面板区域;面板的峰值动应力随着输入加速度的增大呈非线性增大。面板中上部会出现较大的动应力,可能会使面板发生顺坡向和坝轴向的挤压或拉裂破坏,因此建议该区域加强配筋。
Three-dimensional nonlinear FEM is adopted to analysis dynamic response for concrete-face of high CFRD in the different input peak acceleration.The caclulation results show that alone slpoe peak dynamic stress distributed in concrete-face at 0.8 times height of dam,and axial peak dynamic stress distributed in the middle of the crest.Peak dynamic stress of concrete-face is nonlinear advanced with the growth of input acceleration.Stronger dynamic stress appears in the upper part of the concrete-face where may be crushing or tension failure along slope and axial.So it is suggested that the upper region of the concrete-face should be strengthened with reinforcement.
引文
[1]田景元,张志伟.大岗山面板堆石坝加速度放大系数对材料动参数和输入地震动的敏感性分析[J].水电站设计,2006,22(4):20-22.
    [2]张锐,迟世春,林皋,等.地震加速度动态分布及对高土石坝坝坡抗震稳定的影响[J].岩土力学,2008,29(4):1 072-1 076.
    [3]陈国兴.岩土地震工程学[M].北京:科学出版社,2007.
    [4]吴军帅,姜朴.土与混凝土接触面的动力剪切特性[J].岩土工程学报,1992,14(2):61-66.
    [5]彭俊生,罗永坤,彭地.结构动力学、抗震计算与SAP2000应用[M].成都:西南交通大学出版社,2007.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心