非比例阻尼隔震结构的SIMULINK动态仿真
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
根据非比例阻尼隔震结构的动力特性,采用分区Rayleigh阻尼模型,建立了非比例阻尼隔震结构的运动方程,并应用SIMULINK实现了系统的动态仿真分析,结果表明,非比例阻尼隔震结构有效地减轻了结构的地震反应,提高了整个结构的安全度。
According to the dynamic characteristics of the non-proportional damping isolation structure,the paper adopts partition Rayleigh damping model,establishes the movement equation of the non-proportional damping isolation structure,applies SIMULINK to realize the dynamic simulation analysis systematically,and proves that the non-proportional damping isolation structure can reduce the earthquake response effectively and improve the safety of the whole structure.
引文
[1]唐家祥,刘再华.建筑结构基础隔震[M].武汉:华中理工大学出版社,1993.
    [2]周福霖.工程结构减震控制[M].北京:地震出版社,1997.
    [3]周锡元,阎维明,杨润林.建筑结构的隔震、减振和振动控制[J].建筑结构学报,2002,23(2):2-11.
    [4]Kelly,J.M.The Role of damping in seismic isolation[J].Earth-quake Engineering and Structural Dynamics.1999,28(1):3-20.
    [5]Yongfeng Du,Hui Li,Billie F,etc.Effect of non-proportionaldamping on seismic isolation[J].Journal of Structural Control,2002(9):205-236.
    [6]杜永峰,赵国藩.隔震结构中非经典阻尼影响及最佳阻尼比分析[J].地震工程与工程振动,2000,20(3):100-107.
    [7]徐赵东,郭迎庆.MATLAB语言在建筑抗震中的应用[M].北京:科学出版社,2004.
    [8]何平.地震波的频谱特性对隔震结构反应的影响研究[J].山西建筑,2008,34(2):79-80.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心