单出杆式磁流变阻尼器弹簧活塞蓄能器的设计与研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
与双出杆阻尼器相比,单出杆阻尼器有较大的行程,更适合应用于安装空间有限的领域。设计用于平衡活塞杆进出缸体而造成缸体内体积变化的蓄能器是设计单出杆阻尼器的关键技术之一。首先推导了含有弹簧活塞蓄能器的单出杆磁流变阻尼器的阻力计算公式,并分析了阻力的性能特征;而后,讨论了普通弹簧活塞蓄能器的主要参数确定方法与在体积补偿过程中所存在的主要缺陷;最后结合形状记忆合金的超弹性特性,提出了基于超弹性形状记忆合金弹簧的活塞蓄能器,并给出了相关设计方法。
Compared to the double ended magnetorheological(MR) dampers,single-ended MR dampers are more suitable in limited-space fields required due to their larger strokes.An accumulator is needed for a single-ended MR damper to balance the volume changes as the piston rod is pushed out or into the cylinder.Since an accumulator has a great influence on the damper's performances,this influence should be taken into account in the damper's designing procedure.Here,the damping force formula was deduced for a single-ended MR damper with a spring accumulator.Then,both the method of a determination main parameters of regular spring accumulator and its inherent drawbacks were presented.Finally,based on the super elastic character of a shape memory alloy(SMA),a SMA spring accumulator was proposed and its design method was given as well.
引文
[1]Carlson J D,Catanzarite D M,Clair K ASt.Commercial mag-neto-rheological fluid devices[C].Proc.Fifth Int.Conf.onER Fluids,MR Fluids and Associated Technology,U.K.,1995,20-28.
    [2]Lindler J E,Dimock G A,Wereley NM.Design of AMagneto-rheological Automative Shock Absober[C].SPIE,2000,3985:426-437.
    [3]欧进萍.结构振动控制[M].北京:科学出版社,2003.
    [4]Lord Corporation Rheonetic Linear Damper,Rd-1001/Rd-1004,Product Information Sheet,Lord corp.Pub.1997.
    [5]陶宝祺.智能材料结构[M].北京:国防工业出版社,1997,4:57-85.
    [6]胡少华.磁流变阻尼器单出杆型设计与连续工作稳定性研究[D].哈尔滨:哈尔滨工业大学,2008.
    [7]毛晨曦.结构地震损伤监测与控制的SMA智能系统[D].哈尔滨:哈尔滨工业大学,2006:28-47.
    [8]成大先.机械设计手册(弹簧)[M].北京:化学工业出版社,2004,1.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心