单层钢框架结构影响系数分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
结构影响系数体现了不同结构类型的地震作用折减,一般认为结构影响系数与结构的延性水平、结构的超强相关。根据我国《建筑抗震设计规范》(GB50011-2001),设计了两个单层框架结构。选用8条地震波记录,采用ANSYS软件进行动力时程分析,得出结构的延性水平、超强水平以及结构影响系数,并提出单层钢框架结构的结构影响系数的建议值。
The structure influence factors reflect the reduction of the earthquake action of different structure cat-egories.Generally speaking,the structure influence factors are related with the ductility level and overstrength of the structure.Based on Chinese Seismic Code(GB50011-2001),two models of one-story steel frames are de-signed.Time-history dynamic analysis is carried out by the ANSYS software to analyze the models with records of eight seismic waves,the ductility level,the overstrength and structure influence factors are derived.The paper also suggests the value of the structure influence factors of one-story steel frames.
引文
[1]中国建筑科学研究院.GB 50011-2001建筑抗震设计规范[S].北京:中国建筑工业出版社,2001.
    [2]何若全,顾强,孙国华.关于钢结构抗震设计中结构影响系数的讨论[J].苏州科技学院学报:工程技术版,2004,17(4):29-32.
    [3]顾强,何若全,苏明周.钢结构的地震作用[J].苏州科技学院学报:工程技术版,2005,18(2):1-5.
    [4]翟长海,谢礼立.抗震规范应用强度折减系数的现状及分析[J].地震工程与工程振动,2006,26(2):1-7.
    [5]中国工程建设标准化协会标准.CECS160:2004建筑工程抗震性态通则(试用)[S].北京:中国计划出版社,2004.
    [6]Chia-Ming Uang.Establishing R(or Rw)and Cdfactors for Building Seismic Provisions[J].Journal of Structural Engineering,1991,117(1):19-28.
    [7]Chia-Ming Uang,Ahmed Maarouf.Deflection Amplification Factor for Seismic Design Provisions[J].Journal of Structural Engineering,1994,120(8):2423-2436.
    [8]Newmark NM,Hall WJ.Earthquake Spectra and Design[M].Oakland,California,USA,1982.
    [9]吕西林,蒋欢军.结构地震作用和抗震概念设计[M].武汉:武汉工业大学出版社,2004.
    [10]刘文渊.强度折减系数及单层钢框架结构影响系数[D].苏州:苏州科技学院,2008.
    [11]中华人民共和国建设部.GB 50017-2003钢结构设计规范[S].北京:中国建筑工业出版社,2003.
    [12]ATC.Seismic evaluation and retrofit of concrete building[R].Redwood city,California,USA,1996.
    [13]FEMA.NEHRP Recommended Provisions:Design Examples[R].Washington,D.C.,USA,Building Seismic Safety Council,2006.
    [14]李国强.多高层建筑钢结构设计[M].北京:中国建筑工业出版社,2004.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心