大型电励磁直驱风力机动态特性分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
以1.5 MW大型电励磁直驱风力发电机为研究对象,建立风力机三维实体模型。运用ANSYS WORKBENCH有限元软件对自由状态的直驱风力机进行动态特性分析,计算其固有频率及振型。进一步考虑风力机在受载情况下主轴承受力变形后产生的应力刚化效应,对风力机进行预应力下的动态特性分析,并计算其固有频率及振型。自由模态及预应力模态分析结果对比,表明主轴承的应力刚化效应会提高风力机的固有频率,高阶频率比低阶的改变更明显。
Based on the three-dimensional model of the wind turbine system,free modal analysis were done by using the ANSYS software,and the frequencies and modal shapes were got.Furthermore,pre-stressed modal analysis considering stress stiffening effect were also carried out.By comparing the results of free modal and pre-stressed modal analysis,a conclusion is got that the stress stiffening effect can improve the natural frequencies of the wind turbine system,and the improvement is more obviously at higher level modals.
引文
1肖永山,刘少军,宋福民.基于有限元方法的贴片机整机模态研究.机械设计与研究,2008;24(2):103—104
    2 Polinder H,van der Pijl F F A,de Vilder G J,et al.Comparison ofdirect-drive and geared generator concepts for wind turbines.IEEETrans.Energy Conversion,2006;21:725—733
    3赵猛,张以都,马良文,等.基于MSC的装配结构模态分析技术研究.机械科学与技术,2003;22(z1):103—104
    4谢远森,李意民,忠宁,等.旋转预应力条件下的叶片流固耦合模态分.噪声与振动控制,2009;34(4):34—37
    5刘旺玉,苏章明.预应力下车载电机的动态特性.机械设计与研究,2010;26(6):110—111
    6楼梦麟,洪婷婷.体外预应力梁动态特性的分析方法.同济大学学报,2006;34(10):1284—1288
    7涂杨志.模态分析在工程结构中的应用.铁道勘测与设计,2004;6(138):13—14
    8 Li Benli,Song Xiangeng,He Dexin,et al.Mechanism dynamics ofwind turbine.Beijing University of Aeronautics and AstronauticsPress,1999:28—237
    9袁安富,陈俊.ANSYS在模态分析中的应用.制造技术与机床,2007;(8):79—82
    10陈小波,李静,陈健云,等.考虑离心刚化效应的旋转风力机叶片动力特性分析.地震工程与工程振动,2009;29(1):117—122
    11信伟平.风力机旋转叶片动力特性及响应分析.汕头:汕头大学,2005

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心