钨铜线材研究现状
|
摘要
介绍了钨铜线材的应用,分析了其性能要求,系统阐述了钨铜线材的制备技术和研究进展,展望了高性能钨铜线材的发展前景。
The application of tungsten-copper wire was introduced and the performance requirement was analyzed.Meanwhile,a systematic explosion of the preparation technology and research progress was made.Finally,an outlook of W-Cu wire was given in the development prospect.
The application of tungsten-copper wire was introduced and the performance requirement was analyzed.Meanwhile,a systematic explosion of the preparation technology and research progress was made.Finally,an outlook of W-Cu wire was given in the development prospect.
引文
[1]叶恒.旋锻法制备WCu合金线材的工艺研究[D].西安理工大学,2010.
[2]姜国圣,王志法,刘正春.高钨钨铜复合材料的研究现状[J].粉末冶金材料科学与工程,1999,4(1):30-34.
[3]Yang Bin,R M German.Powder Injection Molding and In-filtration Sintering of Superfine Grain W-Cu[J].Int J Pow-der Metal,1997(4):55-63.
[4]周武平.WCu复合材料在电力开关及等离子体技术中的应用[J].高压电器,1994,6:39-45.
[5]John Johnson L,Justin Brezovsky J,Randall German M.Effect of Tungsten Partical Size and Copper Content onDensification of Liquid-phase-sintered W-Cu[J].Metallurgi-cal and Materials Transactions,2005,36A(10):2807-2814.
[6]张喜庆.钨铜复合材料制备及应用进展[J].有色金属,2010,62(3):53-56.
[7]Wang W F.Effect of Tungsten Partical Size and CopperContent on Working Behaviour of W-Cu Alloy ElectrodesDuring Electro-discharge Machining[J].Powder Metallurgy,1997,40(4):295-300.
[8]周武平,吕大铭.钨铜材料应用和生产的发展现状[J].粉末冶金材料科学与工程,2005,10(1):21-25.
[9]Hoack D L.用于散热片和电接触器的钨铜复合材料[J].中国钨业,1997,(1):21.
[10]Zweben C.Metal-matrix Composites for Electronics Packag-ing[J].Journal of the Minerals,Metals&Materials Society,1992,44(7):15-23.
[11]陈伟,邝用庚,周武平.中国高温用钨铜复合材料的研究现状[J].稀有金属材料与工程,2004,33(1):11-14.
[12]范景莲,严德剑,黄伯云,等.国内外钨铜复合材料的研究现状[J].粉末冶金技术,2003,13(2):8-14.
[13]吕大铭.钨铜复合材料研究的新进展[J].中国钨业,2000,15(6):27-31.
[14]邓叶青.1994年全国粉末冶金学术会议论文文集[C].北京:地震出版社,1994:669-670.
[15]周武平,吕大铭,唐安清,等.电火花加工用钨铜电极制造工艺研究[J].机械工程材料,1996,20(2):30-32.
[16]吕大铭.钨铜材料的生产、应用与发展[J].中国钨业,2004,19(5):69-74.
[17]Xiong C S,Xiong Y H,Dong E,et al.Synthesis andStructural Studies of the W-Cu Alloys Prepared byMechanical alloying[J].Nanostructured Matends,1995,5(4):425-432.
[18]Johnson J L,German R M.Phase Equilibrium Effects onthe Enhance Liquid Phase Sintering of Tungsten-copper[J].Metal Trans A,1993,24A(11):2369-2377.
[19]Johnson J L,German R M.Chemically Activated LiquidPhase Sintering of Tungsten-copper[J].Int J of Powder Met-al,1994,30(1):91-102.
[20]German R M.Enhanced Sintering Through Second PhaseAddition[J].Powder Metal,1985,28(1):7.
[21]许煜汾,蒋贤俊.ZTA精密陶瓷拉丝模拉制钨丝的研究[J].合肥工业大学学报,1996,19(4):1-2.
[22]曾荣昌,韩恩厚,刘路,等.轧制组织对镁合金AM60疲劳性能的影响[J].材料研究学报,2003,17(3):241-244.
[23]陈彦博,赵红亮,翁康荣编著.有色金属轧制技术[M].北京:化学工业出版社,2007.
[24]薛康营.轧制-拉伸与旋锻-拉伸加工工艺的对比分析研究[J].中国钼业,2000,24(3):38-43.
[25]宁兴龙,王国宏.钛合金棒线材生产及市场预测[J].稀有金属材料与工程,1998,27(4):248-352.
[26]Maropis N.Ultrasonic Energy Applied to Metal Drawing[J].Wire Industry,1991,5:251-256.
[27]Amamot Shuji.Titanium Fible and Method of Producingthe Same[P].US6325875 B2.2001-09-04.
[28]王天成,柳家成,纪平,等.钛及钛合金丝的辊模拉伸[J].钛工业进展,2001,(2):19.
[29]S-J lim,K-H Na,H-I Choi,et al.Development ofAutomotive Tubular Driveshaft Using the Rotary SwagingProcess[J].Engineering Manufacture,2007,221:1401-1405.
[30]叶恒.旋锻法制备WCu合金线材的工艺研究[D].西安理工大学,2010.
[31]方树铭,雷霆,张玉林,等.旋锻法加工低塑性有色金属异型材的应用研究[J].锻压技术,2007,32(5):69-72.
[32]Bryskin B,Chriner E K.Processing of High-strengthHigh-conductivity W-Cu Composite[A].Kneringer G,Rodhammer P,Withartitz P.Proceedings of the 14thPlansee Seminar[C].Reutte,Tirol,Austria:Plansee MetallA G,1997,358-370.
[33]Froes F H,Bryskin B D,Clark C R,et al.Processing ofHigh-Conductivity W-Cu Composite[A].Proceedings ofthe1997 TMS Annual Meeting[CA].1997,569-583.
[34]陈文革,叶恒.旋锻法制备W-Cu25合金线材的组织与性能研究[J].粉末冶金技术,2011,29(1):13-20.
[35]周武平,吕大铭,唐安清,等.电火花加工用钨铜电极制造工艺[J].研究机械工程材料,1996,20(2):30-32.
[36]熊湘君,刘盈霞.钨粉粒度对电极用钨铜合金组织和性能的影响[J].粉末冶金材料科学与工程,2007,12(2):101-105.
[37]范景莲,刘军,严德剑,等.细晶钨铜复合材料制备工艺的研究[J].粉末冶金技术,2004,22(2):83-86.
[38]于洋,李达人,王尔德,等.钨铜热变形致密化工艺及组织性能研究[J].粉末冶金技术,2009,27(1):45-47.
[39]冯威,栾道成,王正云,等.成形压力与粉末粒径对钨铜复合材料烧结性能的影响[J].粉末冶金材料科学与工程,2007,12(6):354-358.
[40]Belk J A.Deformation Behaviour of Tungsten-copperComposites[J].Powder Metallurgy,1993,2(3):36.
[2]姜国圣,王志法,刘正春.高钨钨铜复合材料的研究现状[J].粉末冶金材料科学与工程,1999,4(1):30-34.
[3]Yang Bin,R M German.Powder Injection Molding and In-filtration Sintering of Superfine Grain W-Cu[J].Int J Pow-der Metal,1997(4):55-63.
[4]周武平.WCu复合材料在电力开关及等离子体技术中的应用[J].高压电器,1994,6:39-45.
[5]John Johnson L,Justin Brezovsky J,Randall German M.Effect of Tungsten Partical Size and Copper Content onDensification of Liquid-phase-sintered W-Cu[J].Metallurgi-cal and Materials Transactions,2005,36A(10):2807-2814.
[6]张喜庆.钨铜复合材料制备及应用进展[J].有色金属,2010,62(3):53-56.
[7]Wang W F.Effect of Tungsten Partical Size and CopperContent on Working Behaviour of W-Cu Alloy ElectrodesDuring Electro-discharge Machining[J].Powder Metallurgy,1997,40(4):295-300.
[8]周武平,吕大铭.钨铜材料应用和生产的发展现状[J].粉末冶金材料科学与工程,2005,10(1):21-25.
[9]Hoack D L.用于散热片和电接触器的钨铜复合材料[J].中国钨业,1997,(1):21.
[10]Zweben C.Metal-matrix Composites for Electronics Packag-ing[J].Journal of the Minerals,Metals&Materials Society,1992,44(7):15-23.
[11]陈伟,邝用庚,周武平.中国高温用钨铜复合材料的研究现状[J].稀有金属材料与工程,2004,33(1):11-14.
[12]范景莲,严德剑,黄伯云,等.国内外钨铜复合材料的研究现状[J].粉末冶金技术,2003,13(2):8-14.
[13]吕大铭.钨铜复合材料研究的新进展[J].中国钨业,2000,15(6):27-31.
[14]邓叶青.1994年全国粉末冶金学术会议论文文集[C].北京:地震出版社,1994:669-670.
[15]周武平,吕大铭,唐安清,等.电火花加工用钨铜电极制造工艺研究[J].机械工程材料,1996,20(2):30-32.
[16]吕大铭.钨铜材料的生产、应用与发展[J].中国钨业,2004,19(5):69-74.
[17]Xiong C S,Xiong Y H,Dong E,et al.Synthesis andStructural Studies of the W-Cu Alloys Prepared byMechanical alloying[J].Nanostructured Matends,1995,5(4):425-432.
[18]Johnson J L,German R M.Phase Equilibrium Effects onthe Enhance Liquid Phase Sintering of Tungsten-copper[J].Metal Trans A,1993,24A(11):2369-2377.
[19]Johnson J L,German R M.Chemically Activated LiquidPhase Sintering of Tungsten-copper[J].Int J of Powder Met-al,1994,30(1):91-102.
[20]German R M.Enhanced Sintering Through Second PhaseAddition[J].Powder Metal,1985,28(1):7.
[21]许煜汾,蒋贤俊.ZTA精密陶瓷拉丝模拉制钨丝的研究[J].合肥工业大学学报,1996,19(4):1-2.
[22]曾荣昌,韩恩厚,刘路,等.轧制组织对镁合金AM60疲劳性能的影响[J].材料研究学报,2003,17(3):241-244.
[23]陈彦博,赵红亮,翁康荣编著.有色金属轧制技术[M].北京:化学工业出版社,2007.
[24]薛康营.轧制-拉伸与旋锻-拉伸加工工艺的对比分析研究[J].中国钼业,2000,24(3):38-43.
[25]宁兴龙,王国宏.钛合金棒线材生产及市场预测[J].稀有金属材料与工程,1998,27(4):248-352.
[26]Maropis N.Ultrasonic Energy Applied to Metal Drawing[J].Wire Industry,1991,5:251-256.
[27]Amamot Shuji.Titanium Fible and Method of Producingthe Same[P].US6325875 B2.2001-09-04.
[28]王天成,柳家成,纪平,等.钛及钛合金丝的辊模拉伸[J].钛工业进展,2001,(2):19.
[29]S-J lim,K-H Na,H-I Choi,et al.Development ofAutomotive Tubular Driveshaft Using the Rotary SwagingProcess[J].Engineering Manufacture,2007,221:1401-1405.
[30]叶恒.旋锻法制备WCu合金线材的工艺研究[D].西安理工大学,2010.
[31]方树铭,雷霆,张玉林,等.旋锻法加工低塑性有色金属异型材的应用研究[J].锻压技术,2007,32(5):69-72.
[32]Bryskin B,Chriner E K.Processing of High-strengthHigh-conductivity W-Cu Composite[A].Kneringer G,Rodhammer P,Withartitz P.Proceedings of the 14thPlansee Seminar[C].Reutte,Tirol,Austria:Plansee MetallA G,1997,358-370.
[33]Froes F H,Bryskin B D,Clark C R,et al.Processing ofHigh-Conductivity W-Cu Composite[A].Proceedings ofthe1997 TMS Annual Meeting[CA].1997,569-583.
[34]陈文革,叶恒.旋锻法制备W-Cu25合金线材的组织与性能研究[J].粉末冶金技术,2011,29(1):13-20.
[35]周武平,吕大铭,唐安清,等.电火花加工用钨铜电极制造工艺[J].研究机械工程材料,1996,20(2):30-32.
[36]熊湘君,刘盈霞.钨粉粒度对电极用钨铜合金组织和性能的影响[J].粉末冶金材料科学与工程,2007,12(2):101-105.
[37]范景莲,刘军,严德剑,等.细晶钨铜复合材料制备工艺的研究[J].粉末冶金技术,2004,22(2):83-86.
[38]于洋,李达人,王尔德,等.钨铜热变形致密化工艺及组织性能研究[J].粉末冶金技术,2009,27(1):45-47.
[39]冯威,栾道成,王正云,等.成形压力与粉末粒径对钨铜复合材料烧结性能的影响[J].粉末冶金材料科学与工程,2007,12(6):354-358.
[40]Belk J A.Deformation Behaviour of Tungsten-copperComposites[J].Powder Metallurgy,1993,2(3):36.
版权所有：© 2023 中国地质图书馆 中国地质调查局地学文献中心