地下洞室动力计算模型合理截取范围研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
利用FLAC3D软件对地下洞室动力计算模型截取范围进行研究。选取四类常见岩体,每类岩体分别横向截取1.5倍~5倍洞径围岩生成六种模型,在FLAC3D中,对各类岩体各模型加载地震波,通过比较相同岩类不同模型监测点变形情况,得出地震计算中模型合理截取范围。研究结果表明,当模型横向围岩截取范围超过2倍洞径时,计算结果随模型截取范围变化不大,综合计算结果精确性及计算效率两个方面因素,可认为地下洞室动力计算模型横向合理截取范围为2.5~4倍洞径,并且当围岩岩性条件较差时可适当选取较大的模型截取范围。
The common software FLAC3-D is employed to study reasonable intercepted range of underground cavern anti-seismic model.Four basic classes of rock masses are selected,then 1.5 times~5 times diameter surrounding rock which produces 6 kinds model.FLAC3D is used to load on each model with El-centro seismic waves are intercepted.In the end,a reasonable conclusion is reached by comparing monitoring site deformation of the different models of the same type of rock mass.The results show that 2.5~4 times diameter is the reasonable intercepted range of the surrounding rock.
引文
[1]晏成明.大跨度地下结构动力计算模型研究[D].南京:河海大学水利水电工程学院,2003.
    [2]赵宝友.大型岩体洞室地震响应及减震措施研究[D].辽宁大连:大连理工大学,2009.
    [3]熊良宵,李天斌,刘勇.隧道地震响应数值模拟研究[J].地质力学学报,2007,13(3):255-260.
    [4]陈贵红.沉管隧道地震响应的影响因素分析[J].中国铁道科学,2005,26(6):93-97.
    [5]朱维申,李晓静.地下大型洞室群稳定性的系统性研究[J].岩石力学与工程学报,2004,23(10):1 689-1 693.
    [6]徐鼎平,陈育民.FLAC/FLAC3D基础与工程实例[M].北京:中国水利水电出版社,2008.
    [7]王如宾.高地震烈度区岩体地下洞室动力响应分析[J].岩石力学与工程学报,2009,28(3):568-575.
    [8]左双英,肖明.映秀湾水电站大型地下洞室群三维非线性损伤地震响应数值分析[J].水力发电学报,2009,28(5):127-133.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心