中海油(深圳)大厦上部结构设计及关键技术问题探讨
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
中海油(深圳)大厦由两栋45层、总高度199.6m的双塔和一栋4层裙房组成,塔楼结构体系均为钢筋混凝土框架-核心筒结构,裙房为框架-剪力墙-大跨钢结构。经过对塔楼平面布置进行分析,认为控制核心筒高宽比在规范限值之内是确保结构体系经济合理的重要前提之一。钢管混凝土组合柱梁柱节点的有限元分析表明,竖向和环向加劲肋的设置对钢管侧壁开洞引起的削弱能起到有效的补强作用。针对不同角度的梁柱定位关系,相应的梁柱节点制定多项措施,以满足纵筋锚固长度问题。考虑裙房存在双向大跨度的限制条件,提出"四角筒+双向钢桁架"的结构方案,取得建筑功能和经济合理的平衡。经过对多项关键技术问题研究分析,均给出可行的解决方案,使得工程能够顺利开展。
CNOOC building in Shenzhen consists of twin towers with 45 floors in the height of 199.6m and a podium with 4floors.The structural system of twin towers is frame-corewall structure,and podium is frame-shearwall structure with largespan steel truss.Planar layouts analysis was conducted to come to the conclusion that the height-width ratio of corewall was considered as an essential precondition for balancing the economics and rationality of the structural system.According to the finite element analysis results of beam-column joints of concrete filled steel tubular column,reasonable arrangements of both the transverse and ring stiffening ribs can strengthen the weak parts of steel tubes due to lateral openings.In view of different beam-column relations,a number of related measures were established about beam-column joints in order to fulfill the requirements of anchorage length of longitudinal steel.The structural scheme of "four corner tubes and bi-directional steel truss"was proposed to balance the architectural functions and economy to solve the problem that the podiums was limited by two-ways and large-span structural arrangements.In sum,most of critical problems were studied and solved to ensure a smooth construction.
引文
[1]张伟,刘俊,肖静,等.总高200m超高层建筑结构选型及优化设计[J].建筑结构,2010,40(S1):373-379.
    [2]JGJ 3—2010高层建筑混凝土结构技术规程[S].北京:中国建筑工业出版社,2011.
    [3]中海油大厦(深圳)建设项目风洞动态测压试验报告[R].广州:广东省建筑科学研究院,2010.
    [4]GB 50009—2012建筑结构荷载规范[S].北京:中国建筑工业出版社,2012.
    [5]中国海洋石油深圳新大厦工程场地地震安全性评价报告[R].深圳:广东省深圳市荔兴抗震技术有限公司,2010.
    [6]GB 50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
    [7]建质[2010]109号超限高层建筑工程抗震设防专项审查技术要点[S].北京,2010.
    [8]粤建市函[2011]580号广东省超限高层建筑工程抗震设防审查实施细则[S].广州,2011.
    [9]DBJ/T 15-46—2005广东实施《高层建筑混凝土结构技术规程》(JGJ 3—2002)补充规定[S].广州:广东省建设厅,2005.
    [10]尧国皇,黄用军.钢管混凝土叠合柱在深圳卓越·皇岗世纪中心项目中的应用[C]//第九届全国现代工程学术研讨会论文集,2009.
    [11]CECS 188:2005钢管混凝土叠合柱结构技术规程[S].北京:中国计划出版社,2005.
    [12]陈勤,张伟,王兴法.管壁密集开孔贯通型钢管混凝土组合柱节点抗震性能有限元分析[C]//第二十二届全国高层建筑结构学术会议论文集,2012.
    [13]朱鸣,张志强,柯长华,等.大跨度钢结构楼盖竖向振动舒适度的研究[J].建筑结构,2008,38(1):72-76.
    [14]中海油(深圳)大厦结构超限可行性报告[R].深圳:香港华艺设计顾问(深圳)有限公司,2011.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心