Q460C高强度钢柱滞回性能有限元分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
为进一步研究Q460C高强度钢柱的滞回性能,在已有试验研究的基础上,采用通用有限元分析软件ANSYS建立了数值模型,对Q460C高强度钢材焊接箱形和H形截面柱在常轴力和水平往复荷载作用下的滞回性能进行模拟,并研究了残余应力对高强度钢试件滞回性能的影响。将有限元分析结果与已有试验结果进行对比,两者吻合较好。研究结果表明:采用提出的Q460C高强度结构钢滞回模型进行有限元分析,能较为准确的预测Q460C高强度钢材焊接H形和箱形柱的滞回性能;试件内残余应力对Q460C高强度钢材焊接H形和箱形截面柱的滞回性能影响较小。
In order to further study the hysteretic behavior of Q460C high strength steel columns,a finite element(FE) model was built up by using general FE analysis software ANSYS based on previous experimental study.Both welded box and H-section columns under constant axial load and horizontal cyclic loading were simulated.Moreover,the effect of residual stresses on the hysteretic behavior of Q460C steel welded box and H-section columns was evaluated.The FE analysis result shows good agreement with the existing experimental results conducted by authors.The proposed hysteretic model for Q460C high strength steel is proved to be accurate to be implemented in the numerical analysis.The comparison of FE analysis results with and without considering initial residual stresses shows that the influence of residual stresses on hysteretic behavior of Q460C high strength steel columns is negligible.
引文
[1]李国强,王彦博,陈素文,孙飞飞.高强度结构钢研究现状及在抗震设防区应用的问题[J].建筑结构学报,2013,34(1):1-13.(LI Guoqiang,WANGYanbo,CHEN Suwen,SUN Feifei.State-of-the-arts ofresearch on high strength structural steels and keyissues of using high strength steels in seismic structures[J].Journal of Building Structures,2013,34(1):1-13.(in Chineses))
    [2]GB50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.(GB50011—2010Codefor seismic design of building[S].Beijing:ChinaArchitecture&Building Press,2010.(in Chinese))
    [3]GB/T1591—2008低合金高强度结构钢[S].北京:中国标准出版社,2008.(GB/T1591—2008Highstrength low alloy structural steels[S].Beijing:ChinaStandard Press,2008.(in Chinese))
    [4]苏明周,顾强.箱形截面钢压弯构件的滞回性能和板件宽厚比限值研究[J].建筑结构学报,2000,21(5):41-47.(SU Mingzhou,GU Qiang.Study onhysteretic behavior of box-section steel beam-columnsunder cyclic bending and on limiting ratio of width-to-thickness of its plates[J].Journal of BuildingStructures,2000,21(5):41-47.(in Chineses))
    [5]苏明周,顾强,申林.钢构件在循环大应变作用下的有限元分析[J].工程力学,2001,18(4):51-59.(SU Ming-zhou,GU Qaing,SHEN Lin.Finite elementanalysis of steel members under cyclic loading[J].Engineering Mechanics,2001,18(4):51-59.(inChinese))
    [6]苏明周,顾强,郭兵.箱形截面钢压弯构件受循环弯矩作用的试验研究和理论分析[J].建筑结构学报,2001,22(4):9-16.(SU Mingzhou,GU Qiang,GUO Bing.Experiment and analysis of the box-sectionmembers with compression and flexure under cyclicbending[J].Journal of Building Structures,2001,22(4):9-16.(in Chineses))
    [7]陈以一,周锋,陈城.宽肢薄腹H形截面钢柱的滞回性能[J].世界地震工程,2002,18(4):23-29.(CHEN Yiyi,ZHOU Feng,CHEN Cheng.Researchon the hysteretic behaviour of H-shaped steel columnswith big width-to-thickness ratio plates[J].WorldInformation on Earthquake Engineering,2002,18(4):23-29.(in Chinese))
    [8]Gao S,Usami T,Ge H.Eccentrically loaded steelcolumns under cyclic in-plane loading[J].Journal ofStructural Engineering,ASCE,2000,126(8):964-973.
    [9]Nakashima M,Liu D.Instability and complete failureof steel columns subjected to cyclic loading[J].Journalof Engineering Mechanics,2005,131(6):559-567.
    [10]Kuwamura H,Kato B.Inelastic behavior of highstrength steel members with low yield ratio[C]//Proceedings of the Pacific Structural Steel Conference.N.S.W.,Australia:Australian Institute of SteelConstruction,1989:429-437.
    [11]邓椿森,施刚,张勇,石永久,王元清.高强度钢材压弯构件循环荷载作用下受力性能的有限元分析[J].建筑结构学报,2010,31(增刊1):28-34.(DENG Chunsen,SHI Gang,ZHANG Yong,SHIYongjiu,WANG Yuanqing.Finite element analysis onhysteretic behavior of high strength steel columns undercyclic loading[J].Journal of Building Structures,2010,31(Suppl.1):28-34.(in Chineses))
    [12]李国强,王彦博,陈素文,崔嵬,孙飞飞.Q460C高强度结构钢焊接H形和箱形截面柱低周反复加载试验研究[J].建筑结构学报,2013,34(3):80-86.(LI Guoqiang,WANG Yanbo,CHEN Suwen,CUIWei,SUN Feifei.Experimental study of Q460C highstrength steel welded H-section and box-section columnsunder cyclic loading[J].Journal of BuildingStructures,2013,34(3):80-86.(in Chineses))
    [13]孙飞飞,谢黎明,崔嵬,李国强,陈素文,王彦博.Q460C高强钢单调与反复加载性能试验研究[J].建筑结构学报,2013,34(1):53-58.(SUN Feifei,XIE Liming,CUI Wei,LI Guoqiang,CHEN Suwen,WANG Yanbo.Experimental study on materialproperties of Q460C high strength steel under monotonicand cyclic loading[J].Journal of Building Structures,2013,34(1):53-58.(in Chineses))
    [14]Wang Yan-Bo,Li Guo-Qiang,Chen Su-Wen.Theassessment of residual stresses in welded high strengthsteel box sections[J].Journal of Constructional SteelResearch,2012,76:93-99.
    [15]Wang Yan-Bo,Li Guo-Qiang,Chen Su-Wen.Residualstresses in welded flame-cut high strength steel H-sections[J].Journal of Constructional Steel Research,2012,79:159-165.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心