高强度双角钢十字组合断面承载力研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
该文结合试验研究和理论分析对双角钢十字组合断面受力性能做了初步探索,分别考察了构件的长细比、肢宽比和填板对承载力的影响。根据薄板能量理论和虚功原理,推导出构件极限承载力公式,提出了适用于工程设计的建议计算方法,并与国内外规范计算结果进行了比较。结果表明:该理论分析模型的适用性较好,建议计算方法对工程设计有一定的适用价值。
The ultimate strength of a dual-angle cross combined section of high-strength steel was researched based on experimental and theoretical analyses.The influence of slenderness ratios,limb-width ratios and filled plates on the strength was researched.According to thin-plate energy theory and a virtual work principle,the formula of ultimate strength was derived and the calculation method of ultimate strength was proposed and compared with that of normal coded one.The results show that the analysis model and proposed method had theoretical and practical significance for engineering design.
引文
[1]胡大柱,李宏男.格构式输电铁塔组成杆件对极限承载力影响的研究[J].世界地震工程,2004,12(9):50―55.Hu Dazhu,Li Hongnan.Influence of components onultimate strength in lattice transmission tower[J].Journalof World Earthquake Engineering,2004,12(9):50―55.(in Chinese)
    [2]李静斌,丁洁民.十字形截面轴心钢压杆的扭转屈曲[J].河南科学,2004,22(1):103―107.Li Jingbin,Ding Jiemin.Torsional buckling of axial steelstruts of crisscross section[J].Journal of Henan Science,2004,22(1):103―107.(in Chinese)
    [3]刘红燕,李志业.受压角钢杆件长细比修正系数研究[J].建筑钢结构进展,2004,6(4):29―31.Liu Hongyan,Li Zhiye.Research on modified coefficientof slenderness ratio of angle member in compression[J].Progress in Steel Building Structures,2004,6(4):29―31.(in Chinese)
    [4]李君谊,李振宝.冷弯不等边角钢轴心受压杆稳定系数研究[J].电力建设,2008,29(7):4―7.Li Junyi,Li Zhenbao.Study on stability coefficient ofaxially compressed cold-formed non-equilateral anglesteel[J].Journal of Electric Power Construction Science,2008,29(7):4―7.(in Chinese)
    [5]默增禄,耿景都.不等边角钢用于输电杆塔的试验研究[J].电力建设,2001,22(7):10―14.Mo Zenglu,Geng Jingdu.Study and test on applicationof non-equilateral angle steel for transmission towers[J].Journal of Electric Power Construction Science,2001,22(7):10―14.(in Chinese)
    [6]张中权.冷弯薄壁型钢轴心受压构件的稳定性计算[J].建筑结构学报,1991,12(4):2―10.Zhang Zhongquan.Calculation of stability of axiallyloaded compression members made of cold-formedthin-walled steel sections[J].Journal of BuildingStructures,1991,12(4):2―10.(in Chinese)
    [7]李振宝,石鹿言,刑海军,等.Q420双角钢十字组合截面压杆承载力试验[J].电力建设,2009,30(9):8―11.Li Zhenbao,Shi Luyan,Xing Haijun,et al.Research onbearing capability of Q420 dual-angle steel crosscombined section[J].Journal of Electric PowerConstruction Science,2009,30(9):8―11.(in Chinese)
    [8]钟寅亥,金晓华.输电铁塔双角钢填板计算方法[J].广东电力,2008,21(3):37―39.Zhong Yinhai,Jin Xiaohua.Calculation method of padconnecting two angle steel in transmission steel tower[J].Journal of Guangdong Electric Power,2008,21(3):37―39.(in Chinese)
    [9]左元龙,赵峥,付鹏程,等.大跨越输电铁塔十字组合角钢填板的设计与试验[J].武汉大学学报(工学版),2007,40(5):209―213.Zuo Yuanlong,Zhao Zheng,Fu Pengcheng,et al.Testand research on cross-section combined angle steels forpower transmission towers[J].Engineering Journal ofWuhan University,2007,40(5):209―213.(in Chinese)
    [10]Goodier J N.The buckling of compressed bars by torsionand flexure[R].Ithaca Cornell University ExperimentStation,December 1941.
    [11]Timoshenko S P.Theory of bending,torsion andbuckling of thin-walled members of open cross section[R].Boston:Journal of the Franklin Institute,Apr andMay 1945.
    [12]Bleich F.Buckling strength of metal structures[M].NewYork:McGraw-Hill,1952:153―198.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心